FS: Many 96 LT4 parts *cheap, many free*
#64
Intermediate
Member Since: Jul 2013
Location: Springfield MO
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
#67
Instructor
I am looking for the plastic clip in the engine bay that the fuel lines clip into. it is attached to the fender well and the fuel lines clip into them.
#72
Heel & Toe
Member Since: Apr 2015
Location: Scottsville ky
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
If you still have.
Consolidating in to a complete list of what I have left. I still have a bunch of spares left from my car. I've dropped all prices so its all pretty cheap; I'd rather it go to a good home here than ebay or scrap
I have pics of everything, just didn't want to throw them all on in one post so let me know if you'd like to see anything.
All prices are OBO Plus shipping from the Seattle, WA area.
I have pics of everything, just didn't want to throw them all on in one post so let me know if you'd like to see anything.
All prices are OBO Plus shipping from the Seattle, WA area.
- Set of new comp cams solid roller 1.55 diameter valve springs with TI retainers (with shims and locators): was $100 *Now $50*
- Set of Comp Cams pushrod guide plates (used, very good condition): $10
- Set of ARP 7/16 rocker studs (used, very good condition): $20
- Rear camber rods with bushings and camber adjust bolts: $20
- Radiator shroud, unmodified: $15
***Free Stuff*** - Base suspension sway bars with links (front and rear): FREE
- Stock rear spring bolts: FREE
- Rear spring mounts: FREE
- Used ZF6 speed sensor: FREE
- Stock wipers (blade holder part, no arms): FREE
- Plastic shield/cover for steering column to rack connection: FREE
#75
Melting Slicks
Thread Starter
Member Since: Dec 1999
Location: Austin, TX
Posts: 2,813
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the lack of replies guys -- I haven't been on here for a while due to a home project
The stuff in the list is what I have left plus some engine parts (LT4 short block, exhaust manifolds, TB, LT4 heads (one needs repair), LT4 perf timing set (used 30K miles)
plus the list below:
Set of new comp cams solid roller 1.55 diameter valve springs with TI retainers (with shims and locators): was $100 *Now $50*
Set of Comp Cams pushrod guide plates (used, very good condition): $10
Set of ARP 7/16 rocker studs (used, very good condition): $20
Rear camber rods with bushings and camber adjust bolts: $20
Radiator shroud, unmodified: $15
***Free Stuff***
Base suspension sway bars with links (front and rear): FREE
Stock rear spring bolts: FREE
Rear spring mounts: FREE
Used ZF6 speed sensor: FREE
Stock wipers (blade holder part, no arms): FREE
Plastic shield/cover for steering column to rack connection: FREE
#76
Parts under driver dash
PM Sent, thanks!
Sorry for the lack of replies guys -- I haven't been on here for a while due to a home project
The stuff in the list is what I have left plus some engine parts (LT4 short block, exhaust manifolds, TB, LT4 heads (one needs repair), LT4 perf timing set (used 30K miles)
plus the list below:
Set of new comp cams solid roller 1.55 diameter valve springs with TI retainers (with shims and locators): was $100 *Now $50*
Set of Comp Cams pushrod guide plates (used, very good condition): $10
Set of ARP 7/16 rocker studs (used, very good condition): $20
Rear camber rods with bushings and camber adjust bolts: $20
Radiator shroud, unmodified: $15
***Free Stuff***
Base suspension sway bars with links (front and rear): FREE
Stock rear spring bolts: FREE
Rear spring mounts: FREE
Used ZF6 speed sensor: FREE
Stock wipers (blade holder part, no arms): FREE
Plastic shield/cover for steering column to rack connection: FREE
Sorry for the lack of replies guys -- I haven't been on here for a while due to a home project
The stuff in the list is what I have left plus some engine parts (LT4 short block, exhaust manifolds, TB, LT4 heads (one needs repair), LT4 perf timing set (used 30K miles)
plus the list below:
Set of new comp cams solid roller 1.55 diameter valve springs with TI retainers (with shims and locators): was $100 *Now $50*
Set of Comp Cams pushrod guide plates (used, very good condition): $10
Set of ARP 7/16 rocker studs (used, very good condition): $20
Rear camber rods with bushings and camber adjust bolts: $20
Radiator shroud, unmodified: $15
***Free Stuff***
Base suspension sway bars with links (front and rear): FREE
Stock rear spring bolts: FREE
Rear spring mounts: FREE
Used ZF6 speed sensor: FREE
Stock wipers (blade holder part, no arms): FREE
Plastic shield/cover for steering column to rack connection: FREE
#77
Camber Rods
Mark I'll take the camber rods. How much for shipping to 78634. No hurry.TIA
#79
Cruising
Member Since: Nov 2014
Location: Glendale Az
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
free stuff
I am interested in the rear spring mounts and bolts, what ever you have, and the rear sway bar and links that you have.
Packing and shipping to 85308 $ ?
Also looking for a rear spring if you have one? Dan
Packing and shipping to 85308 $ ?
Also looking for a rear spring if you have one? Dan