FS: Pair of Weld Pro Star 15 x 10 Wheels
#1
Le Mans Master
Thread Starter
FS: Pair of Weld Pro Star 15 x 10 Wheels
..... SOLD ... SOLD ..... ..... TWO 15 x 10 Weld Pro Star Wheels with 6.5" back spacing ... ONE wheel is brand new , the other has been used but shows nicely ... these will fit '84-87 vettes and may work on the later ones ... Great for drag slicks or 15" drag radials ... Very light ............ $350 shipped to the lower 48 ..........
Last edited by C409; 02-13-2015 at 11:16 AM.
#3
What size drag radials were you running with these?
How much clearance is there...Any chance of rubbing or needing body trimming?
How much clearance is there...Any chance of rubbing or needing body trimming?
Last edited by HotrodCorvette; 02-05-2015 at 11:07 PM. Reason: addition
#4
Le Mans Master
Thread Starter
......... I ran slicks ... 26 x 10.00 and 28 x 10.50 M/T ... I never used these wheels but an identical pair ..... I did have to trim the inner rear part of the inner fender well (plastic) on both sides for tire clearance ... and I used some aftermarket suspension bump stops to keep the tires away from the lip of the fender and to keep the half shafts parallel to the pavement ... a friend has the same wheels on his vette with 275/50/15 M/T drag radials ... I'm pretty sure he ran 275/60's last time ... I bought the used wheel originally for test fit purposes ... just to make sure they'd fit without issues ... mounted a slick and found out that it worked so I ordered a new wheel but before the new one arrived I bought a pair that had already had the rim screws installed and used them instead .