Procharger P600b for sale!
#1
Instructor
Thread Starter
Procharger P600b Full kit for sale! LT1/LT4 Only
Selling my P600b headunit, bracket, Belt, and feed/return new and old. Worked great before I took it off for my motor for rebuild. I had it at Procharger rebuilt as NEW! For sale is the Headunit and the original bracket along with a fairly new green belt (year or so old) and oil lines to feed the headunit, all that fit my 1995 LT1 Corvette. I am selling because I upgraded to a D1SC for my 383 motor. Price set at $1,900 obo for a fully rebuilt unit (Shipping not included). Great deal if you want to go Supercharged! The Procharger Headunits alone start a $2k.
Last edited by luckydekko; 11-16-2015 at 06:14 PM.
#4
Race Director
I wanted to chime in...p600b is a great blower that I am using. I'm making 520 RWHP on a stock bottom end (afr195 head/header) meth/water 1993 Lt1. 12.5 psi boost at 6000 rpm. Traps 123 mph in the quarter.
This blower has a proven track record vs some of the newer blowers that haven't been around as long.
This blower has a proven track record vs some of the newer blowers that haven't been around as long.
#6
Instructor
Thread Starter
Thanks Guys! Dizwiz24 is right! If you to make power this and Greg at Blowerworks is the Key! If anyone is interested I will supply the serial number so you can check the history with Procharger.
#8
Instructor
Thread Starter
This came off my 95... If you have a stock bottom end this would be a good blower but you run the risk of adding excessive wear and tear on the motor based on age...
As far as other things needed.... depends on how far you want to go.. If you stock I can provide you with a keyed hub that works with the stock crank pulley. You will need probably a new oil feed line, be able to weld bungs or buy a new oil pan for a drain for the blower, a good coil, an intercooling system and a intake system into blower... I would use Prochargers with this set up. Ummm My mind is going blank but I think that's about it just to get the blower working.. You will need to upgrade plugs and route lines, and some other things as you make power obviously.. but this is basically 1/2 of what you need that would come in a kit..
As far as other things needed.... depends on how far you want to go.. If you stock I can provide you with a keyed hub that works with the stock crank pulley. You will need probably a new oil feed line, be able to weld bungs or buy a new oil pan for a drain for the blower, a good coil, an intercooling system and a intake system into blower... I would use Prochargers with this set up. Ummm My mind is going blank but I think that's about it just to get the blower working.. You will need to upgrade plugs and route lines, and some other things as you make power obviously.. but this is basically 1/2 of what you need that would come in a kit..
#10
Wish this was a more complete kit! Ive been looking for a used supercharger kit since I bought the car!
Im sure that thing can make a beast of an lt1.
free bump
Im sure that thing can make a beast of an lt1.
free bump
Last edited by trilkb; 11-01-2015 at 06:25 PM.
#11
Intermediate
Member Since: Nov 2013
Location: Dartmouth MA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Selling my P600b headunit, bracket, Belt, and feed/return new and old. Worked great before I took it off for my motor for rebuild. I had it at Procharger rebuilt as NEW! For sale is the Headunit and the original bracket along with a fairly new green belt (year or so old) and oil lines to feed the headunit, all that fit my 1995 LT1 Corvette. I am selling because I upgraded to a D1SC for my 383 motor. Price set at $1,900 obo for a fully rebuilt unit (Shipping not included). Great deal if you want to go Supercharged! The Procharger Headunits alone start a $2k.
will this fit a L98
will this fit a L98
#12
Instructor
Thread Starter
Now being sold as a full kit!
Kit includes:
Procharger P600b, fresh rebuilt (by Procharger), like new!
Hoses/new and used
Bracketry
Greenbelt
Procharger Intercooler
Intake tubes/ Intercooler tubes
Keyed Crank hub
Does not fit L98..
MSRP on these kits new run about $6,000+ Headunits alone are this price! Great deal for someone who wants bolt-on 500+hp to a pretty much stock motor.
$2,500
Kit includes:
Procharger P600b, fresh rebuilt (by Procharger), like new!
Hoses/new and used
Bracketry
Greenbelt
Procharger Intercooler
Intake tubes/ Intercooler tubes
Keyed Crank hub
Does not fit L98..
MSRP on these kits new run about $6,000+ Headunits alone are this price! Great deal for someone who wants bolt-on 500+hp to a pretty much stock motor.
$2,500
#15
Selling my P600b headunit, bracket, Belt, and feed/return new and old. Worked great before I took it off for my motor for rebuild. I had it at Procharger rebuilt as NEW! For sale is the Headunit and the original bracket along with a fairly new green belt (year or so old) and oil lines to feed the headunit, all that fit my 1995 LT1 Corvette. I am selling because I upgraded to a D1SC for my 383 motor. Price set at $1,900 obo for a fully rebuilt unit (Shipping not included). Great deal if you want to go Supercharged! The Procharger Headunits alone start a $2k.