Parting out 1984 Corvette
#1
Parting out 1984 Corvette
I am parting out a 1984 Corvette. Car is complete, lots of parts to be had. Nothing has been taken off yet. Here is a list of some items I have a price on but feel free to contact me for anything you need and I will check the part out and let you know a price. Here is a listing of some of the big stuff but contact me for anything specific. I can text or email photos if needed. Check this Youtube link to see a video of the car:
https://www.youtube.com/watch?v=Tqph...ature=youtu.be
All big items are available for pickup I am in the 62025 zip code.
Right and left door complete. $200 each
Rear bumper $200
Front bumper $200
Headlights $150 each or $250 for the set (need new gear on driver side)
Hood (very rough but usable) $50
Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair
An extra set of black door trim panels in good shape $100 for both.
Set of wheels, decent shape, tires are dry. $250 for set
Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection.
Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150
Targa top (Solid top not plexiglass. No headliner, needs repainted) $300
Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100
Back glass with third brake light $60
Driveshaft $50
RD Racing Crossbar $200
Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800.
All parts are still on the car, will take off as I sell.
https://www.youtube.com/watch?v=Tqph...ature=youtu.be
All big items are available for pickup I am in the 62025 zip code.
Right and left door complete. $200 each
Rear bumper $200
Front bumper $200
Headlights $150 each or $250 for the set (need new gear on driver side)
Hood (very rough but usable) $50
Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair
An extra set of black door trim panels in good shape $100 for both.
Set of wheels, decent shape, tires are dry. $250 for set
Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection.
Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150
Targa top (Solid top not plexiglass. No headliner, needs repainted) $300
Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100
Back glass with third brake light $60
Driveshaft $50
RD Racing Crossbar $200
Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800.
All parts are still on the car, will take off as I sell.
#3
Crossbar
Hi,
I could send you some pictures late tonight if you need any (at work now) or you can go to a Craigslist ad I have that has a lot of photos of the car including the crossbar at http://stlouis.craigslist.org/pts/4913338955.html
There is a link to a video in the ad where I do a walk around of the car and I show the crossbar in that too. I would think it would work in a convertible since it mounts right behind the seats and it shouldn't interfere with anything. You should be able to tell by the photos.
If you need additional shots or more info let me know.j
I could send you some pictures late tonight if you need any (at work now) or you can go to a Craigslist ad I have that has a lot of photos of the car including the crossbar at http://stlouis.craigslist.org/pts/4913338955.html
There is a link to a video in the ad where I do a walk around of the car and I show the crossbar in that too. I would think it would work in a convertible since it mounts right behind the seats and it shouldn't interfere with anything. You should be able to tell by the photos.
If you need additional shots or more info let me know.j
#5
4th Gear
Member Since: Jan 2015
Location: Port Orchard WA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Powered Seat Racks
Hi - If you have good powered seat tracks, I would be interested. Let me know a price. I need both the driver and passenger side seat power tracks.
wemery@outlook.com
Thanks,
3ddriver
wemery@outlook.com
Thanks,
3ddriver
#10
Racer
Member Since: Aug 2014
Location: Bossier City Louisiana
Posts: 269
Likes: 0
Received 4 Likes
on
4 Posts
Hi. You mention a set of black door panels. Are they complete with the speaker covers, arm rests and the upper plastic piece that holds the felt for the inside door windows? If so, I will buy them, if you still have them that is. My interior is black and I have been looking for these to complete my interior.
Thanks
Russ
Thanks
Russ
#11
PM sent.
#13
again, PM sent...
#15
hello - anyone out there? for the third time, PM sent.
edit: just realized, HughG hasn't posted or replied to this thread in 3 months...
edit: just realized, HughG hasn't posted or replied to this thread in 3 months...
Last edited by Joe C; 07-01-2015 at 03:49 AM.
#17
Targa top
I know this is a older listing but I'm in need of a targa top for my c4 1985 targa top
Just thought I'd check
Monte k
Anderson IN
Just thought I'd check
Monte k
Anderson IN
I am parting out a 1984 Corvette. Car is complete, lots of parts to be had. Nothing has been taken off yet. Here is a list of some items I have a price on but feel free to contact me for anything you need and I will check the part out and let you know a price. Here is a listing of some of the big stuff but contact me for anything specific. I can text or email photos if needed. Check this Youtube link to see a video of the car:
https://www.youtube.com/watch?v=Tqph...ature=youtu.be
All big items are available for pickup I am in the 62025 zip code.
Right and left door complete. $200 each
Rear bumper $200
Front bumper $200
Headlights $150 each or $250 for the set (need new gear on driver side)
Hood (very rough but usable) $50
Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair
An extra set of black door trim panels in good shape $100 for both.
Set of wheels, decent shape, tires are dry. $250 for set
Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection.
Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150
Targa top (Solid top not plexiglass. No headliner, needs repainted) $300
Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100
Back glass with third brake light $60
Driveshaft $50
RD Racing Crossbar $200
Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800.
All parts are still on the car, will take off as I sell.
https://www.youtube.com/watch?v=Tqph...ature=youtu.be
All big items are available for pickup I am in the 62025 zip code.
Right and left door complete. $200 each
Rear bumper $200
Front bumper $200
Headlights $150 each or $250 for the set (need new gear on driver side)
Hood (very rough but usable) $50
Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair
An extra set of black door trim panels in good shape $100 for both.
Set of wheels, decent shape, tires are dry. $250 for set
Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection.
Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150
Targa top (Solid top not plexiglass. No headliner, needs repainted) $300
Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100
Back glass with third brake light $60
Driveshaft $50
RD Racing Crossbar $200
Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800.
All parts are still on the car, will take off as I sell.
#18
Sorry, that was one of the first things I sold. I actually got another car since then that had a refurbished top that was mint, first thing that sold off of that car too. Hard to find a good used one.
#19
Instructor
Hugh, I'm looking for a working headlight switch, a working power mirror switch, and possibly the lock cylinders out of the doors with the switches and linkages.
#20
Advanced
Member Since: Mar 2011
Location: Cedar Rapids Iowa
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
dana 36 307 pumpkin only don't need rest offer? reply to gcgroom@gmail.com as I check that more than here tks GG