CSexy06VY

I have a ton of parts I need to sell, cleaning out storage and all parts must go. I have the following listed parts as well as others not listed, so feel free to email with needs and I'll check if I have it.

Small Block Chevy parts:
Vortec Holley Stealth Ram intake manifold, brand new never used = $375
Tall SBC aluminum valve covers = $100
New Aluminum SBC 2-piece design Timing Cover = $60
New Aluminum SBC Oil Pan = $75
Full Roller Rockers Self-aligning SBC 1.5 ratio, slightly used for 200 miles = $125

Corvette C4 113 Bare Aluminum Cylinder Heads from 91 C4 = $200 for the pair
Corvette C4 TPI lower intake base, started to port = $50
Corvette C4 TPI Upper Plenum Speed Density, ported for up to 58mm Throttle Body = $125
Corvette C4 Exhaust Manifolds = $75 for pair
Corvette/Camaro TPI Runners stock = $75 for pair
Rebuilt 700R4 transmission from 91 Camaro with 2,500 miles, trans-go shift kit, sonomex pistons, corvette servo, aluminum pan with drain plug, all parts used were recommended from Dana at Pro-Built Transmissions = $800.00 OBO

85-92 Camaro TPI intake base stock = $50
87-92 Camaro SBC small cap Distributor with Accel Cap and Rotor = $75
SBC Front Timing Cover with new crank seal = $25


Alpine CD Radio with Front USB and Sirius/Pandora capability = $50
5.25 Infinity Kappa Speakers = $50/pair
10" Rockford Fosgate Slim Design/low profile Subwoofers = $75 each

Feel free to email with any questions or request pics, I will update list with additional parts when I have time. Thanks for looking.

1993C4LT1

Damn, if only they were 1.6

for the additional parts

CSexy06VY

Sorry, I may still have a set or two of roller tip 1.6 rockers

1993C4LT1

Let me know if you do

CSexy06VY

I have a ton of parts I need to sell, cleaning out storage and all parts must go. I have the following listed parts as well as others not listed, so feel free to email with needs and I'll check if I have it.

UPDATED LIST AS OF 10/5/15

Small Block Chevy parts:

Tall SBC aluminum valve covers = $100
New Aluminum SBC 2-piece design Timing Cover = $60
New Aluminum SBC Oil Pan = $75


Corvette C4 113 Bare Aluminum Cylinder Heads from 91 C4 = $200 for the pair
Corvette C4 TPI lower intake base, started to port = $50
Corvette C4 TPI Upper Plenum Speed Density, ported for up to 58mm Throttle Body = $125
Corvette C4 Exhaust Manifolds = $75 for pair
Corvette/Camaro TPI Runners stock = $75 for pair

Rebuilt 700R4 transmission from 91 Camaro with 2,500 miles, trans-go shift kit, sonomex pistons, corvette servo, aluminum pan with drain plug, all parts used were recommended from Dana at Pro-Built Transmissions = $800.00 OBO

85-92 Camaro TPI intake base stock = $50
87-92 Camaro SBC small cap Distributor with Accel Cap and Rotor = $75
SBC Front Timing Cover with new crank seal = $25


Alpine CD Radio with Front USB and Sirius/Pandora capability = $50
5.25 Infinity Kappa Speakers = $50/pair
10" Rockford Fosgate Slim Design/low profile Subwoofers = $75 each

Feel free to email with any questions or request pics, I will update list with additional parts when I have time. Thanks for looking.

maverickmk

PM sent about the timing cover.

CSexy06VY

CSexy06VY

1993C4LT1

Fast 102 or 92? How much and will it fit an 05 C6?

CSexy06VY

It's a 102 and will fit a 05 c6 ls2 perfect, one of the best mods you can do to a ls2. Asking $750.

Let me know thanks,

Bruce Witherspoon

Interested in the intake and the heads. Can you give me a phone #

NOMOREWORK

Did you ever sell the heads ?