F/S slp Headers fresh high heat coating w/gaskets and hardware.
12-12-2015, 06:54 PM
#1
F/S slp Headers fresh high heat coating w/gaskets and hardware.
.#### #### ####!!!! $500.00
Last edited by black 96 grand sport; 08-28-2016 at 06:05 PM. Reason: Repost
The following users liked this post:
black 96 grand sport (12-12-2015)
11-20-2016, 09:35 AM
#4
Safety Car
The following users liked this post:
black 96 grand sport (11-20-2016)
11-20-2016, 11:33 AM
#5
These are shorty heders they directly replace the exhaust manifold on lt1 and lt4 engines. If the tpi engines use the same exhaust manifold they should be able to use these also, I do not know! Do your own research.
11-21-2016, 06:16 PM
#6
Burning Brakes
I sold mine to a guy with an L98 and he didn't have a problem.
The following users liked this post:
black 96 grand sport (11-21-2016)
The following users liked this post:
black 96 grand sport (12-19-2016)
12-19-2016, 01:14 PM
#9
I don't think it really matters to the thousands of people that have viewed these, cause I'm not giving these away!
Last edited by black 96 grand sport; 12-19-2016 at 01:15 PM.
12-19-2016, 03:11 PM
#11
Safety Car
I had two sets I ended up basically giving away because they warped and I couldn't get all 6 bolts in any longer. Curious if yours have the same problem.
Contemplating putting shorty headers on my '94 or just keeping the manifolds.
-- Joe
07-22-2017, 11:48 PM
#19
Can you show pictures with all of the bolts in the head?
I had two sets I ended up basically giving away because they warped and I couldn't get all 6 bolts in any longer. Curious if yours have the same problem.
Contemplating putting shorty headers on my '94 or just keeping the manifolds.
-- Joe
I had two sets I ended up basically giving away because they warped and I couldn't get all 6 bolts in any longer. Curious if yours have the same problem.
Contemplating putting shorty headers on my '94 or just keeping the manifolds.
-- Joe
12-10-2017, 12:53 AM
#20
SLP SHORTY HEADERS COATED
* Legal for street use in ALL 50 States.
* Mandrel bent .055"(409) wall thickness stainless steel tubing, optional .065"(304 SS)
* 3/8" thick, investment cast 304 SS flanges for better sealing and longer life.
* Compatible with all factory emission equipment
* Performance guarantee*
* Limited Lifetime Warranty*
* Easy, bolt-on installation
From factory no coating would have cost $500+$250 Coating=$750.
* Legal for street use in ALL 50 States.
* Mandrel bent .055"(409) wall thickness stainless steel tubing, optional .065"(304 SS)
* 3/8" thick, investment cast 304 SS flanges for better sealing and longer life.
* Compatible with all factory emission equipment
* Performance guarantee*
* Limited Lifetime Warranty*
* Easy, bolt-on installation
From factory no coating would have cost $500+$250 Coating=$750.