1986 Coupe 4+3 manual Project FS or part out
01-11-2016, 10:42 PM
#1
Intermediate
Thread Starter
1986 Coupe 4+3 manual Project FS or part out
I have had this C4 for 4 years now. Needed a paint job. I disassembled the car to paint with the intention of building an ITE or SVRA legal race car. The car ran well when I bought it. It needed a new crank damper. I put on a new timing chain and sprockets, new timing cover, new damper and a Flow Cooler water pump. Car ran great, has 122,xxx miles on it; does not use oil all cylinders have very good compression (175# +/- 5#). The 4+3 transmission was serviced and operates very well. The car is painted Performance Yellow, base/clear coat. I bought a C5 with 17,000 miles and have another SCCA road race car so my motivation to get the C4 done is there but the time isn't between work and the other cars. I have all of the interior pieces,modules, heater controls, dash that works. Almost new BFGs on OE alloys. I have new black carpet kit, new complete weather seal kit. The body is very good, the front and rear bumper covers are excellent. All of the glass is good. Headlights assemblies and motors are good. Frame is a solid, no accident frame. Front and rear suspension are in very good shape. Dana 44 with 3.07 gears is quiet and in excellent condition.
Email or PM me with your needs and I'll get pictures of the part(s) you want. All parts will be priced less shipping.
Looking for $4000 for the whole works.
Rear suspension, caliper to caliper $1150
Front suspension caliper to caliper $750
New QA1 front and rear aluminum body non-adjustable shocks $275 for the set.
L98 engine $750
DNE 4+3 transmission (OD in fine shape Fluid was not burnt or had any particles in it) $600 Engine and trans together $1100.
Newish DynoMax Cat-back Y pipe $75
DynoMax mufflers are all but new(no rust or corrosion) $100 for the pair.
Make an offer on any part you need.
Located in New Oxford, Pa ( near Gettysburg)
PM me or email 67asmustang@gmail.com
Thanks
New Dyno Max mufflers, cat back pipe and Y-pipe
New timing chain set, new balancer, new Flow Cooler water pump
New BC/CC paint job
Last edited by rdchaplin; 04-07-2016 at 07:51 PM. Reason: pictures
04-07-2016, 07:50 PM
#4
Intermediate
Thread Starter
Bump
Make offer on parts
I have the complete interior and dash , gauges, heater controls etc.
Digital dash works
Engine has 175 # compression +/- 5 #
Transmission works fine including OD.
The trim panels around the rear window is cracked and repaired.
Door panels are presentable and functional.
Make offer on parts
I have the complete interior and dash , gauges, heater controls etc.
Digital dash works
Engine has 175 # compression +/- 5 #
Transmission works fine including OD.
The trim panels around the rear window is cracked and repaired.
Door panels are presentable and functional.
Last edited by rdchaplin; 04-07-2016 at 07:51 PM.
04-28-2016, 01:22 AM
#9
Need Differential/Batwing
I have had this C4 for 4 years now. Needed a paint job. I disassembled the car to paint with the intention of building an ITE or SVRA legal race car. The car ran well when I bought it. It needed a new crank damper. I put on a new timing chain and sprockets, new timing cover, new damper and a Flow Cooler water pump. Car ran great, has 122,xxx miles on it; does not use oil all cylinders have very good compression (175# +/- 5#). The 4+3 transmission was serviced and operates very well. The car is painted Performance Yellow, base/clear coat. I bought a C5 with 17,000 miles and have another SCCA road race car so my motivation to get the C4 done is there but the time isn't between work and the other cars. I have all of the interior pieces,modules, heater controls, dash that works. Almost new BFGs on OE alloys. I have new black carpet kit, new complete weather seal kit. The body is very good, the front and rear bumper covers are excellent. All of the glass is good. Headlights assemblies and motors are good. Frame is a solid, no accident frame. Front and rear suspension are in very good shape. Dana 44 with 3.07 gears is quiet and in excellent condition.
Email or PM me with your needs and I'll get pictures of the part(s) you want. All parts will be priced less shipping.
Looking for $4000 for the whole works.
Rear suspension, caliper to caliper $1150
Front suspension caliper to caliper $750
New QA1 front and rear aluminum body non-adjustable shocks $275 for the set.
L98 engine $750
DNE 4+3 transmission (OD in fine shape Fluid was not burnt or had any particles in it) $600 Engine and trans together $1100.
Newish DynoMax Cat-back Y pipe $75
DynoMax mufflers are all but new(no rust or corrosion) $100 for the pair.
Make an offer on any part you need.
Located in New Oxford, Pa ( near Gettysburg)
PM me or email 67asmustang@gmail.com
Thanks
New Dyno Max mufflers, cat back pipe and Y-pipe
New timing chain set, new balancer, new Flow Cooler water pump
New BC/CC paint job
Please advise price for batwing, or the whole differential if necessary.
Please advise your location; I would prefer to pickup if practical.
S. L. Sikes, Burton, Texas
Leeandmaryjane@gmail.com
05-04-2016, 12:40 AM
#10
Heel & Toe
Member Since: Apr 2016
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I'll post the thread for you
https://www.corvetteforum.com/forums...-part-out.html
https://www.corvetteforum.com/forums...-part-out.html
08-21-2019, 08:00 AM
#12
Le Mans Master
