FS: Various Parts
#1
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,186
Likes: 0
Received 106 Likes
on
71 Posts
FS: Various Parts
Power window/lock switch bezel, 84 - 90, (Corvette Central #484552): $10
Water Pump, Airtex AW5066: $85, metal impeller not plastic
Halo interior panels: $45
Steering wheel, 94 - 96: $50
'96 HVAC vacuum lines, complete: $50
Door panel lamps: $15
Clutch master cylinder, OEM for rebuilding: $50
Jack hold-down clamps: $5
Front brake pads, one pair only....I have no idea why I only have one pair:FREE
Silver lug nut caps, 22 of them: $0.50 each
One half shaft...I bought a set of used ones after I broke one half shaft changing the U joints...."I thought I had removed that retainer clip".....nope....destroyed the yoke. This is the extra one: $25
Shipping is not included in above prices. Regarding payment; Paypal is fine, however if you would send the funds as a gift I would appreciate it....taking enough of a loss as it is.
PLEASE reply within this posting FIRST....even if all you say is that you are sending me a PM. I am not going to get into another bind where someone sends me a PM without replying to this posting and causes an argument as to who was first.
FREE STUFF, just pay for shipping:
1. O2 sensors from my '95, three of them.
I will be adding items and pictures as I have time.
Water Pump, Airtex AW5066: $85, metal impeller not plastic
Halo interior panels: $45
Steering wheel, 94 - 96: $50
'96 HVAC vacuum lines, complete: $50
Door panel lamps: $15
Clutch master cylinder, OEM for rebuilding: $50
Jack hold-down clamps: $5
Front brake pads, one pair only....I have no idea why I only have one pair:FREE
Silver lug nut caps, 22 of them: $0.50 each
One half shaft...I bought a set of used ones after I broke one half shaft changing the U joints...."I thought I had removed that retainer clip".....nope....destroyed the yoke. This is the extra one: $25
Shipping is not included in above prices. Regarding payment; Paypal is fine, however if you would send the funds as a gift I would appreciate it....taking enough of a loss as it is.
PLEASE reply within this posting FIRST....even if all you say is that you are sending me a PM. I am not going to get into another bind where someone sends me a PM without replying to this posting and causes an argument as to who was first.
FREE STUFF, just pay for shipping:
1. O2 sensors from my '95, three of them.
I will be adding items and pictures as I have time.
Last edited by LannyL81; 06-05-2016 at 07:22 PM.
The following users liked this post:
ZeeAreOne94 (05-25-2016)
#4
Pro
Man, I should have asked if you had any other parts when I got the flares. How much for shipping for the wheel caps and the sensor/vent cover to 32583?
#5
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,186
Likes: 0
Received 106 Likes
on
71 Posts
Fastnail: I received a PM with a time stamp earlier than your posting regarding the wheel centers, which had me edit my original posting as I am not going to respond to PMs without a reply in this thread FIRST.
With that said, the wheel centers are spoken for. The sensor/vent cover would fit into a USPS small Priority box; $6.80
I also found the silver lug nut covers, any interest in these? I have 20 of them?
With that said, the wheel centers are spoken for. The sensor/vent cover would fit into a USPS small Priority box; $6.80
I also found the silver lug nut covers, any interest in these? I have 20 of them?
Last edited by LannyL81; 05-12-2016 at 05:27 PM.
#6
Pro
Hey Lanny,
I'll take the vent cover and I am interested in the lug covers. Can I get a pic of them, and what do you want for them? I think it would all fit in a small priority mail box.
I'll take the vent cover and I am interested in the lug covers. Can I get a pic of them, and what do you want for them? I think it would all fit in a small priority mail box.
Last edited by Fastnail; 05-12-2016 at 05:48 PM.
#13
Pro
Lanny,
Do you still have the jack hold down clamps, and do you have the thumb screws for them?
Thanks,
Mark
Do you still have the jack hold down clamps, and do you have the thumb screws for them?
Thanks,
Mark
Last edited by Fastnail; 05-24-2016 at 01:59 PM.
#15
Advanced
Lanny, I'm interested in the muffler eliminators...do you still have them? What would shipping cost be to 54157?
Thanks
Jonny
EDIT- Checked my exhaust to see if these will bolt right on, and previous owner had everything welded, so I am not going to cut it up as I wanted to be able to put stock system back when needed.
Thanks
Jonny
EDIT- Checked my exhaust to see if these will bolt right on, and previous owner had everything welded, so I am not going to cut it up as I wanted to be able to put stock system back when needed.
Last edited by ZeeAreOne94; 05-25-2016 at 12:02 PM.
#18
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,186
Likes: 0
Received 106 Likes
on
71 Posts
Fastnail: I do have the jack hold down clamps and the two thumbscrews.
Mike: nope no lug wrench.
ZeeAreOne94: I will get a shipping price, expect it to be around $60 or even more; shipping these is just not cheap!
odxr: Let me double check the shipping charge as UPS has really been surprising me with their rates lately.
-=Jeff=-: the panels are the originals from my '96, in black. No cracks, but there is a scratch that previous owner covered with some kind of marker or something. I will attempt to get a picture of it; send me an email address or if not I will add picture to posting.
Thanks
Mike: nope no lug wrench.
ZeeAreOne94: I will get a shipping price, expect it to be around $60 or even more; shipping these is just not cheap!
odxr: Let me double check the shipping charge as UPS has really been surprising me with their rates lately.
-=Jeff=-: the panels are the originals from my '96, in black. No cracks, but there is a scratch that previous owner covered with some kind of marker or something. I will attempt to get a picture of it; send me an email address or if not I will add picture to posting.
Thanks
Last edited by LannyL81; 05-25-2016 at 11:38 AM.
#19
Advanced
Sorry Lanny, did not look under car to make sure the eliminators would bolt right on...I'm sure they would but previous owner had entire system welded on and I don't want to cut my pipes. Sorry about that, so let others know they are still available. Thx
#20
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,186
Likes: 0
Received 106 Likes
on
71 Posts
But at this time the muffler eliminators are still for sale.