Front swaybar differences between years
#1
Drifting
Thread Starter
Front swaybar interchange between years?
Are the front swaybars different between the 85-87 vettes and the 88-96 ones? If so, what is different or how do you tell the differences?
OK, I probably asked the wrong question above. When I've see swaybars listed, they are either for 85-87 or 88-96. Iwant to get a used 30mm front swaybar for my '89 and was wondering if there was any physical difference between the bars used in the earlier cars vs the later ones, or if it is just the mounting hardware that is different.
OK, I probably asked the wrong question above. When I've see swaybars listed, they are either for 85-87 or 88-96. Iwant to get a used 30mm front swaybar for my '89 and was wondering if there was any physical difference between the bars used in the earlier cars vs the later ones, or if it is just the mounting hardware that is different.
Last edited by shotchkiss; 06-22-2005 at 10:13 PM. Reason: Question Clarification
#2
Race Director
Member Since: Dec 1999
Location: Almost all Skyline Cruises Vettes at Waterside 1-5
Posts: 11,182
Likes: 0
Received 1 Like
on
1 Post
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by shotchkiss
Are the front swaybars different between the 85-87 vettes and the 88-96 ones? If so, what is different or how do you tell the differences?
do a google search on hib halverson, look for his web page on c4 suspensions. I used to have it, but I lost it
seeya
#4
Team Owner
Member Since: Sep 2001
Location: Athens AL
Posts: 59,641
Received 1,400 Likes
on
1,016 Posts
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
They changed the suspension geometry in 88, and generally the sway bar size increases after those years as they changed their suspension philosophy starting in 88.
You will not be able to use the earlier bars in front.
You will not be able to use the earlier bars in front.
#5
Drifting
Thread Starter
So how do I tell the later (88+) bars apart from the earlier ones (85-87) if I were to go to a swap meet and look for them? Do they measure different between the mounting points, are they shaped different...?