95 LT won't start
#1
Cruising
Thread Starter
Member Since: Dec 2010
Location: McKenna WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
95 LT won't start
My 95 LT 1 with Vortech supercharger and ignition controller won't start.
Ran fine day before , no fuel pressure and no spark although the auxliuary fuel is working. Main fuses all check good. My optispark is 8 months old. The battery and check engine light stay on after i try to start .Any help is much appreciated .
Jimlynn1
Ran fine day before , no fuel pressure and no spark although the auxliuary fuel is working. Main fuses all check good. My optispark is 8 months old. The battery and check engine light stay on after i try to start .Any help is much appreciated .
Jimlynn1
#2
Tech Contributor
Does it crank? If no, try cleaning the pellet on the key. Having said that, you should at least have fuel pressure. Check for voltage at the pump. When you turn the key to "run", you should see voltage for ~2 seconds.
#3
Cruising
Thread Starter
Member Since: Dec 2010
Location: McKenna WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does crank. I checked all main fues blocks for voltage with ignition on ,
I have a Crane retard controller and it has power and the auxiliary fuel pump is working .
I don't know if the PCM actually controls the two , ignition and fuel pump ? The battery and check engine lights remain on after I try to start ?
Jim
I have a Crane retard controller and it has power and the auxiliary fuel pump is working .
I don't know if the PCM actually controls the two , ignition and fuel pump ? The battery and check engine lights remain on after I try to start ?
Jim
#4
Tech Contributor
Yes it does crank. I checked all main fues blocks for voltage with ignition on ,
I have a Crane retard controller and it has power and the auxiliary fuel pump is working .
I don't know if the PCM actually controls the two , ignition and fuel pump ? The battery and check engine lights remain on after I try to start ?
Jim
I have a Crane retard controller and it has power and the auxiliary fuel pump is working .
I don't know if the PCM actually controls the two , ignition and fuel pump ? The battery and check engine lights remain on after I try to start ?
Jim
Refer to my prior post...
Check for voltage at the pump. When you turn the key to "run", you should see voltage for ~2 seconds.
Report back your findings