Timken vs. AC Delco
#1
Melting Slicks
Thread Starter
Timken vs. AC Delco
I need to buy a front hub assembly/bearing for my car. 94 coupe. Corvette Recycling has original NOS AC delco for $199.99 plus shipping of $12.00. Of course the local Autozone has Timken for $185 and with tax it is $198.00 So the prices are oh so close...So now it is a question of Timken quality vs. AC Delco quality? The car is mainly a weekend toy with some autocrossing planned one day. I do not plan on road racing the car right now. What is the take on Timken??
Last edited by jakers; 06-11-2008 at 11:27 AM.
#2
Timkens
Installed them as a precautionary, all 4 corners, in my 94 6sp, 143K, 4 months ago...no runs, drips, or errors so far. Mines a toy too, no heavy demands.
Cheers
Cheers
Last edited by jim_hewett; 06-11-2008 at 10:54 AM.
#3
Melting Slicks
Thread Starter
http://forums.corvetteforum.com/show...ghlight=timken
#6
Thoroughly chapped
Member Since: Oct 2006
Location: If you're not angry, you're not paying attention
Posts: 20,355
Received 409 Likes
on
327 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17
NCM Member '09
A/C Delco is not a manufacturer anymore, just a re-boxer, getting their
various parts from other manufacturers. I can't claim to know who the
bearing supplier is to them, but it's either Timken or BCA. BCA is owned
by Federal-Mogul, once a proud American name, now made in Mexico.
various parts from other manufacturers. I can't claim to know who the
bearing supplier is to them, but it's either Timken or BCA. BCA is owned
by Federal-Mogul, once a proud American name, now made in Mexico.
#7
Drifting
Do your homework first.I just bought some front hub bearings for my XJR Jag and although it said Timken on the box the bearings were stamped made in South Korea.I'm afraid we will see more of this every day.I don't know where the originals were manufactured but they failed at under 30,000 which doesn't say much for them either.
#8
Melting Slicks
Thread Starter
Do your homework first.I just bought some front hub bearings for my XJR Jag and although it said Timken on the box the bearings were stamped made in South Korea.I'm afraid we will see more of this every day.I don't know where the originals were manufactured but they failed at under 30,000 which doesn't say much for them either.
#9
A/C Delco is not a manufacturer anymore, just a re-boxer, getting their
various parts from other manufacturers. I can't claim to know who the
bearing supplier is to them, but it's either Timken or BCA. BCA is owned
by Federal-Mogul, once a proud American name, now made in Mexico.
various parts from other manufacturers. I can't claim to know who the
bearing supplier is to them, but it's either Timken or BCA. BCA is owned
by Federal-Mogul, once a proud American name, now made in Mexico.
Last edited by jim_hewett; 06-14-2008 at 08:57 AM.
#11
Race Director
Do your homework first.I just bought some front hub bearings for my XJR Jag and although it said Timken on the box the bearings were stamped made in South Korea.I'm afraid we will see more of this every day.I don't know where the originals were manufactured but they failed at under 30,000 which doesn't say much for them either.
Today the right front failed.. 610 miles after install.
This imported offshore junk being parmed off on us is getting beyong irritating.
#12
Melting Slicks
The Timken bearings won't last 2 auto-x's.
The old GM bearings were good, now the GM bearings look like Timken, but reboxed.
SFK seems to take a beating on the race track, and stand up to serious abuse.
The old GM bearings were good, now the GM bearings look like Timken, but reboxed.
SFK seems to take a beating on the race track, and stand up to serious abuse.
#13
Melting Slicks
Thread Starter
Bingo... I just bought front and rear bearings. They only had Timken rears and we had to settle for Automotive International Caddie XLR/C5 "OEM Equivalents" for the fronts.
Today the right front failed.. 610 miles after install.
This imported offshore junk being parmed off on us is getting beyong irritating.
Today the right front failed.. 610 miles after install.
This imported offshore junk being parmed off on us is getting beyong irritating.
#14
Tech Contributor
Years ago I had good luck with Timken. The last two sets I've had lasted less than 1 track day.
I have GM bearings on there now, and they at least survived their first weekend of track use. We'll see if they survive an upcoming event in a couple weeks.
I have GM bearings on there now, and they at least survived their first weekend of track use. We'll see if they survive an upcoming event in a couple weeks.
#16
Tech Contributor
#17
Melting Slicks
#18
Tech Contributor
#19
Burning Brakes
This is my Timken experience w/ roughly 5 weekends of abuse.......
http://s33.photobucket.com/albums/d9...akeduct006.flv
Unfortunately, it cost me $1000+ in lost contingency.............
http://s33.photobucket.com/albums/d9...akeduct006.flv
Unfortunately, it cost me $1000+ in lost contingency.............
#20
Melting Slicks
After researching bearings on this forum, I went with HP tapered rear bearings from Wheel Bearings Inc. I replaced both with around 7,000 miles on them after one failed. The HP ones cost a lot more, but should hold up better than my last ones.
My front bearings were tight when I got the car and still seem OK.
113,000 miles. Not sure if they are original or not.
My front bearings were tight when I got the car and still seem OK.
113,000 miles. Not sure if they are original or not.