code 44
06-20-2008, 04:49 PM
#1
Instructor
Thread Starter
Member Since: Mar 2004
Location: Burbank IL
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
code 44
Hi, I have been getting a code 44 for years now and really want to get it running right. I read that the computer should send .35-.55 volts to the sensor when running so i cut the wire going to the O2 sensor (A16) right up by the computer and connected a volt meter to it and the battery and got a reading of only .18 volts. I also ohm checked the ground wire (A22) and it came up good. I replaced the computer a few years ago so im really hoping that it is not the problem but is their anything else that could cause it?
Thanks, Mike
Thanks, Mike
06-21-2008, 08:30 AM
#3
Pro
Member Since: Aug 2000
Location: Richmond TX
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I have been getting a code 44 for years now and really want to get it running right. I read that the computer should send .35-.55 volts to the sensor when running so i cut the wire going to the O2 sensor (A16) right up by the computer and connected a volt meter to it and the battery and got a reading of only .18 volts. I also ohm checked the ground wire (A22) and it came up good. I replaced the computer a few years ago so im really hoping that it is not the problem but is their anything else that could cause it?
Thanks, Mike
Thanks, Mike
Cheers,
Michael
