1985 vett stock cam specs - Corvette Forum

Go Back   Corvette Forum > C4 Corvettes, 1984 - 1996 > C4 Tech/Performance
Log In 
Register FAQ Search Today's Posts Mark Forums Read Vendor Directory
Search

C4 Tech/Performance
L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

1985 vett stock cam specs

Reply
 
 
 
 
Thread Tools Search this Thread
Old 12-06-2010, 10:26 PM   #1
nickpe
CF Senior Member
 
Member Since: Jan 2007
Posts: 214
Location: bethlehem PA
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1985 vett stock cam specs

looking for stock cam specs. lift and advertised duration. also duration @50

what cam are you using. the cam im looking at is 219/227 duration
112 LC lift 468/489.








l
nickpe is offline   Reply With Quote
Old 12-06-2010, 11:28 PM   #2
Muffin
CF Senior Member
 
Muffin's Avatar
 
Member Since: Jun 1999
Posts: 14,925
Location: Merritt Ils Fl
Thanks: 0
Thanked 0 Times in 0 Posts
Default

FSM says:
Intake .2377
Exhaust .2820
Those are lobe lift, with 1.5 rockers that translates to
Intake .410
Exhaust .423

Duration is not given.
Muffin is offline   Reply With Quote
Old 12-07-2010, 12:15 AM   #3
powerpigz-51
CF Senior Member
 
powerpigz-51's Avatar
 
Member Since: May 2006
Posts: 1,426
Location: Chewelah Wa
Thanks: 0
Thanked 1 Time in 1 Post
Default

The info I found is 85 & 86 were the same. 202/206 @ .050", lift with 1.5 rocker is 403/415 and lobe separation 114.5. For the cam you are looking at, you may have problems with clearance. I have heard max lift on stock heads is around .480.
powerpigz-51 is offline   Reply With Quote
Old 12-07-2010, 01:17 AM   #4
mcm95403
CF Senior Member
 
mcm95403's Avatar
 
Member Since: Nov 2009
Posts: 5,679
Location: Fremont CA
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to mcm95403
Default

Quote:
Originally Posted by nickpe View Post
looking for stock cam specs. lift and advertised duration. also duration @50

what cam are you using. the cam im looking at is 219/227 duration
112 LC lift 468/489.
l
Lunati Voodoo?
__________________
Thanks, Marc Medina
www.dunritenetworks.com

previous Vettes: 84 CFI auto, 99 Nassau Blue 6-speed
current Vette is a Turquoise Metallic 91 automatic, 3.07's, Fast Burn heads, SD LT-4 cam, Bosch III's, Accel Super Ram & 58MM TB, LT-1 manifolds, Magnflow catted Y, Flowmaster direct replacement mufflers, 1984 Z51 springs, Koni's, C5 brakes, 275's/315's, VB&P 32mm front sway bar
mcm95403 is offline   Reply With Quote
Old 12-07-2010, 09:07 AM   #5
1986-z51
CF Senior Member
 
Member Since: Sep 2009
Posts: 109
Location: seabrook tx
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Comp cam 12-314-4 260Duration@50 444 lift. Going to put it in at x-mas break. I have a 1986,only mods are headers w/true dual exaust an 1.6 rockers. Whats the point of try to rev past 4500-4800???
1986-z51 is offline   Reply With Quote
Old 12-07-2010, 04:12 PM   #6
jan-erik
CF Senior Member
 
Member Since: Mar 1999
Posts: 677
Location: Oslo, Norway
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi I have the TPIS cam Torque Secrets : int/exh duration 221/230, lift .454 with 1.5 lifters
112 lobe separation. There is a slight lope on idle, but the cam is good gives a good pull.
A stock engine will be slightly vercammed , but have good results .
jan-erik is offline   Reply With Quote
Old 12-07-2010, 06:06 PM   #7
cumbercr
CF Senior Member
 
cumbercr's Avatar
 
Member Since: Mar 2008
Posts: 1,999
Location: Santa Maria CA
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by 1986-z51 View Post
Comp cam 12-314-4 260Duration@50 444 lift. Going to put it in at x-mas break. I have a 1986,only mods are headers w/true dual exaust an 1.6 rockers. Whats the point of try to rev past 4500-4800???
I have the Comp Cam 12-402-4 in my 85. 212/218 duration with .444 lift and 114 LSA. It's a flat tappet cam. It idles like a stock cam.
cumbercr is offline   Reply With Quote
Go Back   Corvette Forum > C4 Corvettes, 1984 - 1996 > C4 Tech/Performance
Reload this Page 1985 vett stock cam specs
 
 
 
Reply


Similar Threads
Thread Thread Starter Forum Replies Last Post
390/427 Cam Specs Spinner-427 C1 & C2 Corvettes 4 04-30-2013 02:32 PM
L82 cam specs... 73StreetRace C3 Tech/Performance 3 09-26-2005 03:24 PM
Need 327 300hp Stock Cam Specs benjtay C3 Tech/Performance 1 10-03-2003 11:45 PM
Lift, Duration and LSA STOCK LS1 CAM blktie8 C5 Tech 3 07-13-2003 09:26 AM
2002 LS6 cam specs exracer28 C5 Tech 5 02-05-2002 02:30 PM


Tags
123144, 12402, 124024, 1985, 86, 90, base, cam, cams, camshaft, comp, corvette, performance, spec, specs, stock

Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


 

All times are GMT -4. The time now is 04:54 PM.