C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

looking for input - ignition pieces/parts - stock L98

Thread Tools
 
Search this Thread
 
Old 10-19-2013, 03:28 AM
  #1  
Joe C
Race Director
Thread Starter
 
Joe C's Avatar
 
Member Since: Aug 2000
Posts: 11,346
Received 700 Likes on 589 Posts

Default looking for input - ignition pieces/parts - stock L98

getting ready to do plugs, cap and rotor, and wires on my 90 (L98). in the past, I've used taylor 8mm wire sets, accel cap and rotor, and bosch platinum plugs. looking for input on what other members are using. my 90 is pretty much a driver - no race application, and i'm not opposed on spending a few extra bucks on quality stuff. looking at ac delco rapidfire platinums 5. may go with another taylor wire set - I've used them in the past, and can't say I've had any issues. up in the air on the cap and rotor - stay with accel or try something like MSD? looking for inputs, comments, and please no flames. TIA
Old 10-19-2013, 04:52 PM
  #2  
AQUILA163
Advanced
 
AQUILA163's Avatar
 
Member Since: Feb 2006
Location: Reading Pa
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts

Default

My favorite with all the tune ups I've done is AC Delco wires with Borg Warner cap and rotor. The wires route much nicer and do not leak spark. The Borg Warner cap and Rotor have brass contacts instead of aluminum and maintain a much larger conductive surface for more miles.



Quick Reply: looking for input - ignition pieces/parts - stock L98



All times are GMT -4. The time now is 08:11 AM.