Fbody front wheel bearing hubs on C4
#1
Pro
Thread Starter
Fbody front wheel bearing hubs on C4
This may have been covered before but I haven't seen a specific thread with pictures so here you go...
After looking around for 1996 C4 Corvette front wheel hubs I found they were quite expensive. Anywho, in the depths of the interwebz I found a thread about using Fbody hubs on a C4. To note I don't know if they work on any other models other than 91-96 C4 and more specifically I am only knowledgeable on the 96.
The only real difference is the Fbody hub bolt holes are threaded. Another note is I am not running ABS, so I can't make a claim on whether the reluctor ring has the same teeth or if the plug is identical. I'm just some guy that happened to buy some 2002 Fbody Moog front wheel bearing hubs and install them.
My car is a 1963 Grand Sport with a C4 suspension and a lot of other custom goodies. Im running 315/30/18s up front and 335/30/18s in the rear, so if the bearings are crap I will find out real quick.
The car.
After looking around for 1996 C4 Corvette front wheel hubs I found they were quite expensive. Anywho, in the depths of the interwebz I found a thread about using Fbody hubs on a C4. To note I don't know if they work on any other models other than 91-96 C4 and more specifically I am only knowledgeable on the 96.
The only real difference is the Fbody hub bolt holes are threaded. Another note is I am not running ABS, so I can't make a claim on whether the reluctor ring has the same teeth or if the plug is identical. I'm just some guy that happened to buy some 2002 Fbody Moog front wheel bearing hubs and install them.
My car is a 1963 Grand Sport with a C4 suspension and a lot of other custom goodies. Im running 315/30/18s up front and 335/30/18s in the rear, so if the bearings are crap I will find out real quick.
The car.
#2
Burning Brakes
I wonder if a brake bracket for a f-body would also fit.
EDIT
although I tend to think those aftermarket brackets place the caliper in the same place as the factory c4 brackets.
EDIT
although I tend to think those aftermarket brackets place the caliper in the same place as the factory c4 brackets.
Last edited by aDigitalPhantom; 08-02-2014 at 03:22 PM.
#4
Pro
Thread Starter
Useful thread! I believe it was Redls1gto's post on another forum that have me the idea.
https://www.corvetteforum.com/c4-general-discussion/2579676-front-wheel-bearings-wear-condition.html?styleid=140
https://www.corvetteforum.com/c4-general-discussion/2579676-front-wheel-bearings-wear-condition.html?styleid=140
#5
That information is pretty widely known and as you mentioned it's for '91+ spindles only. As for the 'construction' comparison, I don't believe I've ever seen that posted. I've never looked either so it may well be out there. Mine is a '90 and the fit is a 'no go'.
NO!!
NO!!
#7
Burning Brakes
It also seems that they are a copy of what is already there on the c4. They are not sold by a sponsor so I cant post a link to them,
#8
Team Owner
Member Since: Aug 2005
Location: Riverside County Southern California
Posts: 34,988
Received 501 Likes
on
342 Posts
Co-winner 2020 C4 of the Year - Modified
2018 Corvette of Year Finalist
2017 C4 of Year
2016 C7 of Year Finalist
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20