Cranks but won't start
06-21-2015, 08:55 AM
#1
2nd Gear
Thread Starter
Member Since: Jun 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Cranks but won't start
I have a 1993 with the lt1 in it and I am getting fuel but no spark. It cranks but won't fire any suggestions before I start replacing stuff that doesn't need replaced.
06-21-2015, 09:01 AM
#2
06-21-2015, 09:15 AM
#4
06-21-2015, 09:50 AM
#5
Safety Car
Yes.
If you have a V/O meter, this link will provide
instructions to test the opti:
https://www.corvetteforum.com/forums...ls-to-ecm.html
If you have a V/O meter, this link will provide
instructions to test the opti:
https://www.corvetteforum.com/forums...ls-to-ecm.html
06-21-2015, 09:54 AM
#6
Could be a corroded pin in one of the connectors. It's possible that your ignition module is bad. It can be tested at most auto parts stores.