installation of 1996 front license plate
#1
Navigator
Thread Starter
Member Since: Jun 2016
Location: Beaverton Oregon
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
installation of 1996 front license plate
Please show and tell me how to take off the front license plate bumper cover and install the front license plate.
#2
Safety Car
Look through the crack in between the filler and the bumper cover on the bottom. You should find 2 small screws there IIRC on their location. Remove them, pull the cover out from the bottom and it should come off. You may or may not find license bolts in there - bolt on your plate.
That's about it.
That's about it.
#4
Melting Slicks
Is there a translucent cover? In NJ we have to have a front plate, I had a T/A and had a smoked cover. It was a limited run and I got one of the last.
Anyone sell a similar cover? Without it it breaks up the lines
Anyone sell a similar cover? Without it it breaks up the lines
#5
Burning Brakes
https://www.amazon.com/1991-1996-Corvette-Front-License-Plate/dp/B000BBUH7Y/ref=sr_1_6?ie=UTF8&qid=1474996990&sr=8-6&keywords=corvette+front+license+plate+ cover
Do yourself a favor and save your money.
#6
Navigator
Thread Starter
Member Since: Jun 2016
Location: Beaverton Oregon
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Look through the crack in between the filler and the bumper cover on the bottom. You should find 2 small screws there IIRC on their location. Remove them, pull the cover out from the bottom and it should come off. You may or may not find license bolts in there - bolt on your plate.
That's about it.
That's about it.