Gary Bagley

Does anybody know what make of Throttle Body this is as you can see in the photos it is black not painted and the unusual thing as far i can see is there is nowhere for the water pipes to fit it has not been modified it is a single casting

C409

..... It looks OEM to me , with an airfoil ... the water manifold on the bottom is easy enough to separate from the IAC portion .....

Gary Bagley

i know the airfoil comes out but there is no fitting for the water manifold on the bottom were the iac valve goes in part of the casting the there is no place for a manifold on the bottom

aklim

Without looking at it, who can say? There are 2 possible options:

1. PO ground off the IAC housing so it doesn't have the inlet and outlet

https://www.corvetteforum.com/forums...post1585639384

2. PO changed the IAC housing

https://www.tpis.com/parts/view/27

Gary Bagley

Thanks for your reply but it is not either of them as i said the iac port is part of the casting it has not been cut or modified in any way

C409

..... I need to see a pic of the bottom .....

Gary Bagley

Not to worry i have only just refitted it so don't want to be taking all off again it just seamed odd to me

WVZR-1

OP - Why wouldn't you just contact A.B.M. Garage - Weymouth? I've seen them mentioned many times in some UK threads.

Maybe reach out to user adi4 or dan_t on the CCCUK forum, adi4 has been mentioned in the past as maybe "affiliated" with ABM (A.B.M.). Maybe not but .........................

Maybe RQ(Ray Quayle) here on the CF is familiar with them.

https://www.corvetteforum.com/forums...ay-quayle.html

Maybe ABM Garage (A.B.M) is familiar with "your car"!!

Gary Bagley

I have spoken to and been to A.B.M. Garage going down there in the summer for me it a 600mile round trip