Install of Dyna Mod HEI Module
09-23-2002, 11:35 PM
#1
Race Director
Thread Starter
Member Since: Aug 2002
Location: tucson AZ
Posts: 13,356
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '04 & '05
Install of Dyna Mod HEI Module
Has anyone installed one of these modules in thier HEI Distributor????
Any hints of beat install????? Help.............
LETS HEAR IT.....
thanks
tony
:confused: :smash: :smash: :smash:
Any hints of beat install????? Help.............
LETS HEAR IT.....
thanks
tony
:confused: :smash: :smash: :smash:
09-24-2002, 02:09 AM
#2
Burning Brakes
Re: Install of Dyna Mod HEI Module (oldace84)
I installed the Accel modual in my 84, no problems after three years. Only tip is to be sure and use that little tube of grease they give you on the bottom side of the modual. Good luck 84 CF 91 ZR-1
09-24-2002, 02:17 AM
#3
Race Director
Thread Starter
Member Since: Aug 2002
Location: tucson AZ
Posts: 13,356
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '04 & '05
Re: Install of Dyna Mod HEI Module (vettl83)
Thanks for the tip.....did you remove the distruitor, or install with it in the car?????
Let me know..OK????OK!!!
THANKS
TONY :smash:
Let me know..OK????OK!!!
THANKS
TONY :smash:
09-24-2002, 02:35 AM
#4
Drifting
Re: Install of Dyna Mod HEI Module (oldace84)
Thanks for the tip.....did you remove the distruitor, or install with it in the car?????
09-24-2002, 08:08 PM
#6
Burning Brakes
Member Since: Jan 2001
Location: Manhattan
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Re: Install of Dyna Mod HEI Module (oldace84)
i installed an accell module.
be careful with the wire connectors to the distributor, mine were very brittle after years of heat. plastic in that condition breaks very easily.
be careful with the wire connectors to the distributor, mine were very brittle after years of heat. plastic in that condition breaks very easily.
