C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

my Brake Master Cylinder is leaking from the reserviors, how should I fix this?

Old 04-03-2003, 07:34 PM
  #1  
CentralCoaster
Team Owner
Thread Starter
 
CentralCoaster's Avatar
 
Member Since: May 2002
Location: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
Posts: 24,337
Likes: 0
Received 17 Likes on 16 Posts
Default my Brake Master Cylinder is leaking from the reserviors, how should I fix this?

Is it simple enough to yank the reserviors and reseal the rubber around them? Anybody done this?

It came as one piece from Ecklers. Been leaking since I bought it, but I never got around to exchanging it.. and now my 90 day warranty is up. :nonod:

I also have the original one off the car. Maybe I can take some parts from it. :confused:


[Modified by CentralCoaster, 4:35 PM 4/3/2003]
Old 04-03-2003, 07:39 PM
  #2  
jackdaroofer
Race Director
Support Corvetteforum!
 
jackdaroofer's Avatar
 
Member Since: Dec 1999
Location: Almost all Skyline Cruises Vettes at Waterside 1-5
Posts: 11,182
Likes: 0
Received 1 Like on 1 Post
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran

Default Re: my Brake Master Cylinder is leaking from the reserviors, how should I fix this? (CentralCoaster)

:cheers:

I don't think it is as simple as simply hand pressing them in. The manual has quite a bit to say on the subject and references some special tools (which may turn out to be GM's part number for your left hand.

Someone will be along shortly with more info....my manual is over in the garage. If no one answers, I'll go get it

:steering:


Thread Tools
Search this Thread
Quick Reply: my Brake Master Cylinder is leaking from the reserviors, how should I fix this?



All times are GMT -4. The time now is 12:30 PM.