Do you need an OptiSpark?
#1
Supporting Vendor
Thread Starter
Do you need an OptiSpark?
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Newly updated Vented $189.95
Non Vented $180.95
http://www.saccitycorvette.com/AIPOptiSpark.html
Here's whats new for the Vented Opti!
Revised Upper and Lower Rubber Gaskets with increased sealing surface
-Thread Lock Compound pre-applied to rotor and sensor mounting screws
-Coated EMI Shield
-Revised Laser Cut Shutter Disc for improved timing accuracy
-Revised Mitsubishi-Spec optical sensor
-Precision Japanese Ball Bearing
Photos of the new updated Vented AIP Optispark (cap colors vary)
NON VENTED OPTI
Attachment 48190879
Non Vented Sensor
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Newly updated Vented $189.95
Non Vented $180.95
http://www.saccitycorvette.com/AIPOptiSpark.html
Here's whats new for the Vented Opti!
Revised Upper and Lower Rubber Gaskets with increased sealing surface
-Thread Lock Compound pre-applied to rotor and sensor mounting screws
-Coated EMI Shield
-Revised Laser Cut Shutter Disc for improved timing accuracy
-Revised Mitsubishi-Spec optical sensor
-Precision Japanese Ball Bearing
Photos of the new updated Vented AIP Optispark (cap colors vary)
NON VENTED OPTI
Attachment 48190879
Non Vented Sensor
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Last edited by SacCityCorvette; 11-10-2019 at 11:40 PM.
#2
Pro
We carry AIP Optisparks with a 2 year warranty
Please check our website:
http://www.saccitycorvette.com/LT1-SBC.html
Please check our website:
http://www.saccitycorvette.com/LT1-SBC.html
The following users liked this post:
SacCityCorvette (02-24-2017)
The following users liked this post:
SacCityCorvette (02-24-2017)
#4
Pro
#6
We carry AIP Optisparks with a 2 year warranty
Please check our website:
http://www.saccitycorvette.com/lt1-sbc.html
Please check our website:
http://www.saccitycorvette.com/lt1-sbc.html
ordered one, please ship as soon as you can
#7
Supporting Vendor
Thread Starter
#8
#9
Supporting Vendor
Thread Starter
Hi pacoW,
Thank you for your business, we really appreciate it!
For some reason GM made two different connectors and that's why we clearly state state on our website " (Note: Harness may not fit all applications and you may need to use your original harness or modify the new one as shown below.)". The Harness fits 90% of the cars but for the few that it does not fit most guys trim off the rib in the connector that is circled in the picture. Sorry for the inconvenience.
Christian
Thank you for your business, we really appreciate it!
For some reason GM made two different connectors and that's why we clearly state state on our website " (Note: Harness may not fit all applications and you may need to use your original harness or modify the new one as shown below.)". The Harness fits 90% of the cars but for the few that it does not fit most guys trim off the rib in the connector that is circled in the picture. Sorry for the inconvenience.
Christian
#10
Supporting Vendor
Thread Starter
New Updated Vented Opti's in stock ready to shipping!