Fs- oz fittipaldi rims/tires set
#1
Burning Brakes
Thread Starter
Fs- oz fittipaldi rims/tires set
FOR SALE
Set Of (4) OZ FITTIPALDI CHROMED RIMS/Centercaps/Tires/LTPWS Sensors:
All for a ZR-1
Lower Price: I want to MOVE this set!@!
$3400
Front:
(2) 9.5 X 17" Chromed 5 Star Rims 56 mm Offset with
(2) Goodyear GSD-3 275/40/17 Tires and
(2) LTPWS Sensors
Rear:
(2) 11.5 X 17" Chromed 5 Star Rims 36mm Offset Deep Dish with
(2) Goodyear GSD-3 315/35/17 Tires and
(2) LTPWS Sensors.
Correct Offset for a ZR-1 (No Spacers Necessary).
Balanced, Ready to Roll. I'll Even Throw in My Custom Socket Insert.
Reason For Sale: I'm Moving to 18" So if you have
18" Fikse or Shelby Rims No Spacers lets talk..........
Prefer Pick Up In Los Angeles
Email Me At: tfed11@earthlink.net
Set Of (4) OZ FITTIPALDI CHROMED RIMS/Centercaps/Tires/LTPWS Sensors:
All for a ZR-1
Lower Price: I want to MOVE this set!@!
$3400
Front:
(2) 9.5 X 17" Chromed 5 Star Rims 56 mm Offset with
(2) Goodyear GSD-3 275/40/17 Tires and
(2) LTPWS Sensors
Rear:
(2) 11.5 X 17" Chromed 5 Star Rims 36mm Offset Deep Dish with
(2) Goodyear GSD-3 315/35/17 Tires and
(2) LTPWS Sensors.
Correct Offset for a ZR-1 (No Spacers Necessary).
Balanced, Ready to Roll. I'll Even Throw in My Custom Socket Insert.
Reason For Sale: I'm Moving to 18" So if you have
18" Fikse or Shelby Rims No Spacers lets talk..........
Prefer Pick Up In Los Angeles
Email Me At: tfed11@earthlink.net
Last edited by 95ZR1; 10-07-2010 at 01:44 PM. Reason: Wanted 2
#4
Burning Brakes
Thread Starter
Thanks! Against a black car (or black dog) adds some BLING!
I know I have to post something. I had these
3 piece rims disassembled and chrome plated and
re-sealed. $3400 for everything,
and no, I don't want to separate.
I know I have to post something. I had these
3 piece rims disassembled and chrome plated and
re-sealed. $3400 for everything,
and no, I don't want to separate.
Last edited by 95ZR1; 10-07-2010 at 01:30 PM. Reason: Wanted 2
#5
Pro
tfed - Where did you get your wheels separated, chromed, and resealed? I ask because I have a set of the Snakeskinner 3-piece wheels that came off of the Morrison Snakeskinner ZR-1s, and I'm planning on doing the same thing to them. Thanks!
#6
Burning Brakes
Thread Starter
Long answer: I learned the hard way that the rims need to
be RESEALED. I had everything re-assembled just to find out that none
of the rims would hold air. Found out the plater did not seal the rims.
I had to take them to another place to again have them disassembled and sealed.
Short answer: I don't really know one plating place that will do it correctly. Maybe someone else can answer, especially closer to you.
Good Luck!
#7
Melting Slicks
Member Since: Jun 2001
Location: Poquoson VA
Posts: 2,979
Likes: 0
Received 0 Likes
on
0 Posts
Bump for a sweet set of wheels. I was just talking about the OZ wheels on my '91 with Mark H at Carlisle and could not remember the name of the FITTIPALDI version.