wtb zr1 camber brace
05-12-2013, 08:43 PM
#2
Burning Brakes
Member Since: Oct 2005
Location: Shelbyville IN
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
05-12-2013, 11:55 PM
#3
Burning Brakes
Thread Starter
05-13-2013, 03:37 PM
#4
Team Owner
from: http://forums.corvetteforum.com/c4-t...post1564438885
They were made for various C4s, early and late L98, LT1/4, LT5. Same concept as the spreader bar for C2/C3s
Saw the OP's other topic, a few old topics:
http://forums.corvetteforum.com/c4-z...-zr-1-lt5.html
http://forums.corvetteforum.com/c4-z...-worth-it.html
I'd keep an eye out on fleabay and the registry. Good luck some of the C4 parts are getting hard to find.
Last edited by 93Polo; 05-13-2013 at 03:42 PM.
05-14-2013, 02:53 AM
#5
Burning Brakes
A word of warning: they are a PITA if you need to do
any front engine or radiator work.
Plus you have to re-adjust your front alignment,
then work around them whenever you want to realign.
On the other hand, they really do stiffen up the front.
any front engine or radiator work.
Plus you have to re-adjust your front alignment,
then work around them whenever you want to realign.
On the other hand, they really do stiffen up the front.
Last edited by 95ZR1; 05-14-2013 at 02:55 AM. Reason: Wanted 2
05-14-2013, 03:31 PM
#6
Tech Contributor
05-14-2013, 10:46 PM
#7
Burning Brakes
Thread Starter
I had one on a prior C4. Thanks for the heads up!
BTW, looks like I found one!!!!
BTW, looks like I found one!!!!