zr-1 braided brake lines from master cylinder
#1
Pro
Thread Starter
zr-1 braided brake lines from master cylinder
One of mine sprung a leak, confirmed it by taking it off and running an air hose through it. Does anyone know who can make these? They appear to be identical.
I would have even attempted to make my own, but I can't even find supplies. Does anyone see a problem using a store pre-made hardline and bending them to shape instead of using braided line?
I would have even attempted to make my own, but I can't even find supplies. Does anyone see a problem using a store pre-made hardline and bending them to shape instead of using braided line?
#2
Race Director
Member Since: Feb 2002
Location: Compound in the Grove, Ga.
Posts: 11,329
Received 910 Likes
on
583 Posts
2020 C3 of the Year Finalist - Unmodified
2019 C4 of Year Finalist (performance mods)
2018 C4 of Year Finalist
2015 C4 of the Year Finalist
St. Jude Donor '16
2020 C3 of the Year Finalist - Unmodified
If you can't find them You may try a shop that makes up ac or hydraulic lines. just a thought.
Jerry may know
http://www.jerrysgaskets.com/
Jerry may know
http://www.jerrysgaskets.com/
#3
I had this same issue come up a few weeks ago. I found a place in town who makes hydraulic lines. I took the line with me and they were able to make a brand new.
Jerry's didn't make these lines. He was able to give me the GM part number, but no dealership had them.
Jerry's didn't make these lines. He was able to give me the GM part number, but no dealership had them.