WTB: Skid plate and impact bar assembly
#1
Drifting
Thread Starter
WTB: Skid plate and impact bar assembly
Does anyone have a set of front skid bars and the front tie bar and brackets that run under the cooling pack? I need the following part numbers plus the front skid bars. I am not sure what the
part numbers are for the front skid plates which hang down from under the front bumper. We just tried to drop the cooling pack back in to the red car and it looks like the previous owner bent the passenger side skid plate under the front bumper and tweaked the tie bar assembly at some point.
1-GM10143525,Bar,Fr.BumperImpact Bar Skid Plate Tie(91-96)
1-GM10086317,Bracket,Fr.Bumper Impact Bar Skid Plate Support,L.H.(91-96)
1-GM10086318,Bracket,Fr.Bumper Impact Bar Skid Plate Support,R.H.(91-96)
For those not conversant with GM Parts,this is the Sub-assembly which bolts to the engine cradle and has the Steering Oil Cooler Mounts welded to it. In the front, it has two brackets bolted to it which are in turn bolted to the two(left and right)Skid plates beneath the bumpers.
part numbers are for the front skid plates which hang down from under the front bumper. We just tried to drop the cooling pack back in to the red car and it looks like the previous owner bent the passenger side skid plate under the front bumper and tweaked the tie bar assembly at some point.
1-GM10143525,Bar,Fr.BumperImpact Bar Skid Plate Tie(91-96)
1-GM10086317,Bracket,Fr.Bumper Impact Bar Skid Plate Support,L.H.(91-96)
1-GM10086318,Bracket,Fr.Bumper Impact Bar Skid Plate Support,R.H.(91-96)
For those not conversant with GM Parts,this is the Sub-assembly which bolts to the engine cradle and has the Steering Oil Cooler Mounts welded to it. In the front, it has two brackets bolted to it which are in turn bolted to the two(left and right)Skid plates beneath the bumpers.
#4
Drifting
Originally Posted by The Lurker
OK, this isn't going well so do any of you know where Corvette Salvage, formally in Dallas, Tx., relocated to?
#5
Drifting
Thread Starter
Originally Posted by White 68
I think it was bought out and stuff moved to Missouri I think
#8
Jst as an FYI, GM no longer carries any of the things that make up the front assembly to include mounting brackets. Nice to know the General is taking care of the 100,000 or so C4s that were sold.