1992 Corvette Black 6spd Coupe *Rolling Chassis* - AutoCross/SCCA
01-03-2011, 12:15 PM
#1
Instructor
Thread Starter
Member Since: Jun 2003
Location: San Diego CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
1992 Corvette Black 6spd Coupe *Rolling Chassis* - AutoCross/SCCA
I'm putting my car up for sale. It is being sold as a rolling chassis and has been used for SCCA autocross racing. I bought this car from another member about a year ago and it was used as a racecar by them too. I thought I had this sold a few months ago, but I still have it so it is for sale again.
Being sold as a rolling chassis with NO engine, transmission, exhaust etc. Put your engine and drive train in and go racing or driving. This car is being sold AS IS.
Tons of Pictures:http://picasaweb.google.com/snvent/1...OQ67r1yZGO3gE#
Performance Upgrades:
Grand Sport J55 13" Front Brakes
Braided Brake Lines/Speed Bleeders
VBP Adjustable front spring (1200lb) - $440 new
Koni adjustable shocks Front and rear
Z51 quick ratio steering rack
Z51 Sway Bar Front
Z51 Sway Bar Rear
Z51 Rear Spring (from an 84)
New master cylinder
ALL poly bushings
Tri-point offset front lower control arm bushings
The D44 rear end is stock, but has been recently serviced. The half shafts have new u-joints. This car has lots of suspension modifications and lots of money in parts. It handled great and offered lots of adjust-ability. I have tons of records and receipts for the car from me and the previous owner.
Body:
1992 Black on Black Coupe
134K Miles
Clean Title
Painted Roof panel
Stock wheels from my 1996 Vette - front tires are near new
Originally a 6spd and D44 rear end with 3.45 gears. It is complete interior and exterior. The paint isn't very nice, but still shiny. It makes a great race car and has hit a few cones in its life. The paint is like a 10 footer which is fine for a race car. It is NOT a show car and would need a paint job to look perfect again.
Interior:
The interior is complete and in nice condition. It shows wear, but looks nice for a 1992 and works fine for a race car. It has two manual leather seats. The drivers side seat has a Corbeau aftermarket seat bracket/slider. I have the stock ones too. The steering wheel has been replaced with a MOMO wheel ($$) and it has the horn functionality.
Price:
$2999 OBO
I am selling this car for its value as used parts if parted out. It would make a great project and is still a great race car. You could have this thing running in no time.
A quick pricing on the parts if you were to part this out:
D44 Swap -$1700, Hood - $500, Steering Wheel - $200, Shock/Springs/Sway Bars - $600, Brakes - $250,
Everything else = Free
Location:
San Diego, CA
Being sold as a rolling chassis with NO engine, transmission, exhaust etc. Put your engine and drive train in and go racing or driving. This car is being sold AS IS.
Tons of Pictures:http://picasaweb.google.com/snvent/1...OQ67r1yZGO3gE#
Performance Upgrades:
Grand Sport J55 13" Front Brakes
Braided Brake Lines/Speed Bleeders
VBP Adjustable front spring (1200lb) - $440 new
Koni adjustable shocks Front and rear
Z51 quick ratio steering rack
Z51 Sway Bar Front
Z51 Sway Bar Rear
Z51 Rear Spring (from an 84)
New master cylinder
ALL poly bushings
Tri-point offset front lower control arm bushings
The D44 rear end is stock, but has been recently serviced. The half shafts have new u-joints. This car has lots of suspension modifications and lots of money in parts. It handled great and offered lots of adjust-ability. I have tons of records and receipts for the car from me and the previous owner.
Body:
1992 Black on Black Coupe
134K Miles
Clean Title
Painted Roof panel
Stock wheels from my 1996 Vette - front tires are near new
Originally a 6spd and D44 rear end with 3.45 gears. It is complete interior and exterior. The paint isn't very nice, but still shiny. It makes a great race car and has hit a few cones in its life. The paint is like a 10 footer which is fine for a race car. It is NOT a show car and would need a paint job to look perfect again.
Interior:
The interior is complete and in nice condition. It shows wear, but looks nice for a 1992 and works fine for a race car. It has two manual leather seats. The drivers side seat has a Corbeau aftermarket seat bracket/slider. I have the stock ones too. The steering wheel has been replaced with a MOMO wheel ($$) and it has the horn functionality.
Price:
$2999 OBO
I am selling this car for its value as used parts if parted out. It would make a great project and is still a great race car. You could have this thing running in no time.
A quick pricing on the parts if you were to part this out:
D44 Swap -$1700, Hood - $500, Steering Wheel - $200, Shock/Springs/Sway Bars - $600, Brakes - $250,
Everything else = Free
Location:
San Diego, CA
Last edited by Tireburnin; 01-04-2011 at 12:42 AM.
01-03-2011, 10:29 PM
#2
Instructor
Thread Starter
Member Since: Jun 2003
Location: San Diego CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I can get shipping quotes through a company I have used multiple times if anyone is interested.
Last edited by Tireburnin; 01-04-2011 at 12:10 PM.
01-04-2011, 06:19 AM
#3
Race Director
Folks, if ya don't like what is for sale it's best to move on without comments.......here is the rule:
http://forums.corvetteforum.com/foru...le-thread.html
PM/E-mail me if you don't understand it........
http://forums.corvetteforum.com/foru...le-thread.html
PM/E-mail me if you don't understand it........
