1996 LT4, aprox 500hp, $11,000 OBO motivated seller
#1
Burning Brakes
Thread Starter
1996 LT4, aprox 500hp, $11,000 OBO motivated seller
For Sale, $11,000 Picked up in Fort Worth or shipped, $12,000 delivered to you. Price is firm. I can drive it to the place of sale, within 500 miles of Fort Worth.
I have had it since 2009. I am the third owner. I have put many upgrades into it. It's been my favorite car ever and it's brought me much joy.
It was in an accident twice when I owned it. Once I spun on ice and kissed a retaining wall. The second time someone backed into my rear bumper. Both times the damage was repaired by a professional facility. (Corvettes of Auburn, WA and Flair Body works, OK)
Engine: (Built 2013)
LT-4
Block punched .030 over, factory deck height (2013)
Eagle Forged crankshaft, 3.48” throw (2013)
Eagle Forged H-beam 6.0” rods (2013)
Mahle Forged Pistons, Flat top, with two valve reliefs -5.0 cc (2013)
Mahle Plasmamoly Rings (gap @ .022 top, .024 second for nitrous/turbo) (2013)
LT-4 heavy duty GMPP timing chain (2013)
Mike Jones Custom Camshaft (276/280 - 232/236 - .612/.612 108/112) (2013)
GMPP LS7 Lifters 12499225 (2013)
AFR 195cc CNC Competition Port Eliminators (AFR 1039) intake 308cfm@.600” lift (2013)
Isky Adjustable guide plates (2013)
Comp Cams 7608 Chromoly Heat Treated Pushrods (2013)
Scorpion Race Series Rocker Arms
SCP1026BL, 1.7:1 rockers (2013)
Melling M-155 oil pump (2013)
Custom CNC and Keyed Crank Hub (2013)
Proform GM Licensed Die-Cast
Aluminum Chevrolet Valve Covers 141-131 (2013)
Port matched LT4 intake manifold (2013)
BBK twin 58mm Throttle body (2012)
FIC Bosch 3 injectors, 28lb/hr (2012)
Aeromotive GM LT-1 Fuel Pressure Regulator 13107 (55psi setting) (2013)
CSD Optispark (2010)
MSD Blaster Coil (2008)
OEM style plug wires (2013)
NGK TR55 spark plugs (2013)
Smooth intake bellows (2013)
K&N filter (2008)
Cut air box lid (2008)
Removed A.I.R. System (2014)
Removed TB heater (2008)
Tune by Mike @ PCM4Less (2013)
Exhaust
ARH 1 3/4” primary, long tube, full race headers, 3” collector (2009)
ARH 3” X pipe (2009)
ARH 3” extensions (2009)
C5 Corsa Indy Pace Mufflers (modified to fit C4) (2009)
Custom mandrel bent piping to mufflers (2009)
Fuel
Walboro 255lph pump (from Lingenfelter) (2013)
Racetronix Hotwire Kit (Lingenfelter) (2013)
Accessories
Steering and Suspension
New power steering pump (2010)
New power steering pump to rack hydraulic hose (2012)
ZR1 reman power steering rack (2010)
VBP Sport rear spring (2008)
VBP lowering bolts (2008)
Front spring lowering kit (2009)
New Z51 shocks (2013)
Lowered 1.25” (2009)
New Alternator (2012)
Drivetrain
ZF s6-40, Black Tag (1993, 13kmi) (installed 2014)
Hurst Short Shifter
New master cylinder (2014)
New slave cylinder (2013)
New Custom Master To Slave Hydraulic hose (2014)
Home made Beam Plates
Spec Lightened Aluminum Flywheel (2011)
Spec Stage 2+ disc and pressure plate (2011)
New throw out bearing (2011)
New pilot bushing (2011)
4.11:1 Richmond Differential gears (2008)
Wheels and Tires
Deep Dish Grand Sport replicas (2013)
Vredestein Ultrac Sessanta 315/35/17 275/40/17 (2013) AMAZING TIRES
Lighting
HID hi/low beam headlights in Crystal Clear lens buckets
HID fog lights
LED interior lighting
Audio
Kenwood 6” touch screen navigation DDX-616
Ipod connector
2 Sony 800w amplifiers for front and rear channels (under seats)
1 Pioneer monoblock 1200w amplifier for subs (behind passenger seat)
2 Pioneer shallow mount subs with custom enclosure above ABS/storage bins
6x9 pioneer 3 way speakers in rear
6.75” midbass and 1” mylar dome tweeter in custom fiberglass kick pannel enclosures
1.25” silk dome tweeters in door pannels
Body
Fresh paint (2011)
Wet sanded and orange peel removed (2012)
All new weather stripping (EPDM Ecklers) (2013)
LT4 badges on fender gills
New hood pop cables
Spare tire removed
Interior
New heater core (2010)
Factory seats in decent shape
Carpet is clean
All interior items work
2 key fobs
3 sets of keys
Headliner came down last week, needs to be refinished.
Battery
New June 2014
Mileage
158xxx
less than 6000 miles on new engine
less than 1000 miles on shocks, tires, wheels
The bad:
Paint by antenna mast needs to be fixed, unprofessional repair.
Minor rock chips were painted over
Trim around windshield has discoloration
Transmission tailshaft housing seal needs to be replaced ($7.98), causing trans oil to drip on exhaust.
PKE fobs are held together with tape
Pass-Key acting up recently, lock cylinder may need to be replaced from wear. I can bypass VATS if needed/wanted.
ASR disabled, ASR throttle adjuster motor had a fault last week, motor still works so it might be the EBTCM
Wiper control board needs to be replaced.
The car comes with
all receipts from the past 5 years
Factory wheels (they're rough, but you can have them)
Solid motor mounts
Extra set of fog lights
Factory service manuals
Wiper motor
Wiper switch control harness
Flex plate that came with rotating assembly (so you can balance match if you replace the alum flywheel)
Original owners manual
Corvette targa top tool
Price negotiable. Motivated to sell.
Hundreds of pics and videos, all questions answered, cross posted.
I have had it since 2009. I am the third owner. I have put many upgrades into it. It's been my favorite car ever and it's brought me much joy.
It was in an accident twice when I owned it. Once I spun on ice and kissed a retaining wall. The second time someone backed into my rear bumper. Both times the damage was repaired by a professional facility. (Corvettes of Auburn, WA and Flair Body works, OK)
Engine: (Built 2013)
LT-4
Block punched .030 over, factory deck height (2013)
Eagle Forged crankshaft, 3.48” throw (2013)
Eagle Forged H-beam 6.0” rods (2013)
Mahle Forged Pistons, Flat top, with two valve reliefs -5.0 cc (2013)
Mahle Plasmamoly Rings (gap @ .022 top, .024 second for nitrous/turbo) (2013)
LT-4 heavy duty GMPP timing chain (2013)
Mike Jones Custom Camshaft (276/280 - 232/236 - .612/.612 108/112) (2013)
GMPP LS7 Lifters 12499225 (2013)
AFR 195cc CNC Competition Port Eliminators (AFR 1039) intake 308cfm@.600” lift (2013)
Isky Adjustable guide plates (2013)
Comp Cams 7608 Chromoly Heat Treated Pushrods (2013)
Scorpion Race Series Rocker Arms
SCP1026BL, 1.7:1 rockers (2013)
Melling M-155 oil pump (2013)
Custom CNC and Keyed Crank Hub (2013)
Proform GM Licensed Die-Cast
Aluminum Chevrolet Valve Covers 141-131 (2013)
Port matched LT4 intake manifold (2013)
BBK twin 58mm Throttle body (2012)
FIC Bosch 3 injectors, 28lb/hr (2012)
Aeromotive GM LT-1 Fuel Pressure Regulator 13107 (55psi setting) (2013)
CSD Optispark (2010)
MSD Blaster Coil (2008)
OEM style plug wires (2013)
NGK TR55 spark plugs (2013)
Smooth intake bellows (2013)
K&N filter (2008)
Cut air box lid (2008)
Removed A.I.R. System (2014)
Removed TB heater (2008)
Tune by Mike @ PCM4Less (2013)
Exhaust
ARH 1 3/4” primary, long tube, full race headers, 3” collector (2009)
ARH 3” X pipe (2009)
ARH 3” extensions (2009)
C5 Corsa Indy Pace Mufflers (modified to fit C4) (2009)
Custom mandrel bent piping to mufflers (2009)
Fuel
Walboro 255lph pump (from Lingenfelter) (2013)
Racetronix Hotwire Kit (Lingenfelter) (2013)
Accessories
Steering and Suspension
New power steering pump (2010)
New power steering pump to rack hydraulic hose (2012)
ZR1 reman power steering rack (2010)
VBP Sport rear spring (2008)
VBP lowering bolts (2008)
Front spring lowering kit (2009)
New Z51 shocks (2013)
Lowered 1.25” (2009)
New Alternator (2012)
Drivetrain
ZF s6-40, Black Tag (1993, 13kmi) (installed 2014)
Hurst Short Shifter
New master cylinder (2014)
New slave cylinder (2013)
New Custom Master To Slave Hydraulic hose (2014)
Home made Beam Plates
Spec Lightened Aluminum Flywheel (2011)
Spec Stage 2+ disc and pressure plate (2011)
New throw out bearing (2011)
New pilot bushing (2011)
4.11:1 Richmond Differential gears (2008)
Wheels and Tires
Deep Dish Grand Sport replicas (2013)
Vredestein Ultrac Sessanta 315/35/17 275/40/17 (2013) AMAZING TIRES
Lighting
HID hi/low beam headlights in Crystal Clear lens buckets
HID fog lights
LED interior lighting
Audio
Kenwood 6” touch screen navigation DDX-616
Ipod connector
2 Sony 800w amplifiers for front and rear channels (under seats)
1 Pioneer monoblock 1200w amplifier for subs (behind passenger seat)
2 Pioneer shallow mount subs with custom enclosure above ABS/storage bins
6x9 pioneer 3 way speakers in rear
6.75” midbass and 1” mylar dome tweeter in custom fiberglass kick pannel enclosures
1.25” silk dome tweeters in door pannels
Body
Fresh paint (2011)
Wet sanded and orange peel removed (2012)
All new weather stripping (EPDM Ecklers) (2013)
LT4 badges on fender gills
New hood pop cables
Spare tire removed
Interior
New heater core (2010)
Factory seats in decent shape
Carpet is clean
All interior items work
2 key fobs
3 sets of keys
Headliner came down last week, needs to be refinished.
Battery
New June 2014
Mileage
158xxx
less than 6000 miles on new engine
less than 1000 miles on shocks, tires, wheels
The bad:
Paint by antenna mast needs to be fixed, unprofessional repair.
Minor rock chips were painted over
Trim around windshield has discoloration
Transmission tailshaft housing seal needs to be replaced ($7.98), causing trans oil to drip on exhaust.
PKE fobs are held together with tape
Pass-Key acting up recently, lock cylinder may need to be replaced from wear. I can bypass VATS if needed/wanted.
ASR disabled, ASR throttle adjuster motor had a fault last week, motor still works so it might be the EBTCM
Wiper control board needs to be replaced.
The car comes with
all receipts from the past 5 years
Factory wheels (they're rough, but you can have them)
Solid motor mounts
Extra set of fog lights
Factory service manuals
Wiper motor
Wiper switch control harness
Flex plate that came with rotating assembly (so you can balance match if you replace the alum flywheel)
Original owners manual
Corvette targa top tool
Price negotiable. Motivated to sell.
Hundreds of pics and videos, all questions answered, cross posted.
Last edited by merlot566jka; 02-24-2015 at 09:04 PM. Reason: Low ballers
#3
wow, the videos of that motor....whew it sounds good!
good luck!!!!
good luck!!!!
#7
Racer
Member Since: Nov 2005
Location: Houston Texas
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
my phone is out of commission at the moment and I'm not able to replace it, however if you could text me at my google voice number I'd very much appreciate getting a few questions answered. I'm very interested in the car.
(409) 233-3230
(409) 233-3230
#9
Instructor
Member Since: May 2010
Location: Maquoketa Iowa
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#11
Burning Brakes
Thread Starter
BUMP
Bought a C7!! C4 must go
Replaced the ASR servo, new EBTCM, New plugs, New wires
Must be sold, highly motivated. Make me an offer I won't refuse.
Can deliver/meet/test drive Mar 9-15 or any other time if you contact me.
360-471-o684
Can bring the C4 to TX2K15, will deliver the car for delivery charge.
Bought a C7!! C4 must go
Replaced the ASR servo, new EBTCM, New plugs, New wires
Must be sold, highly motivated. Make me an offer I won't refuse.
Can deliver/meet/test drive Mar 9-15 or any other time if you contact me.
360-471-o684
Can bring the C4 to TX2K15, will deliver the car for delivery charge.
#16
Burning Brakes
Thread Starter
Yeah, sorry about that. It's cleared out now.
You can contact me quicker at
Anderson.k.jonathan@gmail.com
360-471-o684
Facebook.com/merlot566jka
You can contact me quicker at
Anderson.k.jonathan@gmail.com
360-471-o684
Facebook.com/merlot566jka