1986 Auto
#1
Pro
Thread Starter
1986 Auto
Regrettably, I am putting my Corvette up for sale, Life changes and we have to do what it takes to continue.
I have owned the car for 5years, I am listing my number in case someone wants to ask specific questions about the car. I will try and post as much info as I can. I hardly use the vette because even though I have one daughter in college, my son is in 1st grade, no time to enjoy it.
Silver/Beige Exterior and Bronze Interior, Exterior is extremely clean
57,000 miles
New Leather seat covers and foam and lower support straps, new door panels. New rear window seal, inner and outer windows sweeps.
Carpet is in excellent shape, Alpine CD/Radio. New antenna and motor, replaced hood strut with gas charged type from later year.
A little bit about the Car.
Stock Short-block, aftermarket Hydraulic flat tappet cam, Ported and Polished 113 casting heads, new valves, guides, seals, springs, etc. CC 1.5 Roller rockers. Lingenfelter Super Ram upper and Accel lower intake manifold. 24lb FIC Bosch 3 injectors. Air pump delete, A/C delete, Dewitts aluminum radiator and their fan. Holley 52mm Throttle body, open element Stainless airbox. TPIS full length headers, no Cats, Magnaflow X pipe, Pypes Stainless exhaust with polished tips.
B & M shift kit, stock converter. Dana 36 rear with 3.54.1 ring and pinion. 13" front rotors and larger calipers. 1991 ZR1 wheels and new Mickey Thompson street comp radials, 275/40/17 up front, 315/35/17 in the rear. Chip has been tuned through the mail by TPIS. I will take pictures of the dyno sheets tonight, car made 300 hp and 380 ftlbs.
Really a fun car to drive.
If the car sells I have a basement full of parts I will be listing, including a Dana 44 with a 3.07.1, batwing, C brace and driveshaft, TFS 195cc heads, CC 1.6 stainless Roller Rockers, Cola 3.48 Forged steel Crankshaft, Lunati 6.0"Forged Connecting rods, Wiseco forged pistons. If I think more I will list it.
Asking $7,500.00, obo
Dyno Sheets
917-842-0835
Thanks
Matt
Last edited by renegade69; 12-01-2015 at 09:23 AM. Reason: New Price
#2
Pro
Thread Starter
Ttt
regrettably, i am putting my corvette up for sale, life changes and we have to do what it takes to continue.
I have owned the car for 5years, i am listing my number in case someone wants to ask specific questions about the car. I will try and post as much info as i can. I hardly use the vette because even though i have one daughter in college, my son is in 1st grade, no time to enjoy it.
Silver/beige exterior and bronze interior, exterior is extremely clean
57,000 miles
new leather seat covers and foam and lower support straps, new door panels. New rear window seal, inner and outer windows sweeps.
Carpet is in excellent shape, alpine cd/radio. New antenna and motor, replaced hood strut with gas charged type from later year.
A little bit about the car.
Stock short-block, aftermarket hydraulic flat tappet cam, ported and polished 113 casting heads, new valves, guides, seals, springs, etc. Cc 1.5 roller rockers. Lingenfelter super ram upper and accel lower intake manifold. 24lb fic bosch 3 injectors. Air pump delete, a/c delete, dewitts aluminum radiator and their fan. Holley 52mm throttle body, open element stainless airbox. Tpis full length headers, no cats, magnaflow x pipe, pypes stainless exhaust with polished tips.
B & m shift kit, stock converter. Dana 36 rear with 3.54.1 ring and pinion. 13" front rotors and larger calipers. 1991 zr1 wheels and new mickey thompson street comp radials, 275/40/17 up front, 315/35/17 in the rear. Chip has been tuned through the mail by tpis. I will take pictures of the dyno sheets tonight, car made 300 hp and 380 ftlbs.
Really a fun car to drive.
If the car sells i have a basement full of parts i will be listing, including a dana 44 with a 3.07.1, batwing, c brace and driveshaft, tfs 195cc heads, cc 1.6 stainless roller rockers, cola 3.48 forged steel crankshaft, lunati 6.0"forged connecting rods, wiseco forged pistons. If i think more i will list it.
Asking $8,000.00, open to offers.
Going to try and upload pics.
917-842-0835
thanks
matt
I have owned the car for 5years, i am listing my number in case someone wants to ask specific questions about the car. I will try and post as much info as i can. I hardly use the vette because even though i have one daughter in college, my son is in 1st grade, no time to enjoy it.
Silver/beige exterior and bronze interior, exterior is extremely clean
57,000 miles
new leather seat covers and foam and lower support straps, new door panels. New rear window seal, inner and outer windows sweeps.
Carpet is in excellent shape, alpine cd/radio. New antenna and motor, replaced hood strut with gas charged type from later year.
A little bit about the car.
Stock short-block, aftermarket hydraulic flat tappet cam, ported and polished 113 casting heads, new valves, guides, seals, springs, etc. Cc 1.5 roller rockers. Lingenfelter super ram upper and accel lower intake manifold. 24lb fic bosch 3 injectors. Air pump delete, a/c delete, dewitts aluminum radiator and their fan. Holley 52mm throttle body, open element stainless airbox. Tpis full length headers, no cats, magnaflow x pipe, pypes stainless exhaust with polished tips.
B & m shift kit, stock converter. Dana 36 rear with 3.54.1 ring and pinion. 13" front rotors and larger calipers. 1991 zr1 wheels and new mickey thompson street comp radials, 275/40/17 up front, 315/35/17 in the rear. Chip has been tuned through the mail by tpis. I will take pictures of the dyno sheets tonight, car made 300 hp and 380 ftlbs.
Really a fun car to drive.
If the car sells i have a basement full of parts i will be listing, including a dana 44 with a 3.07.1, batwing, c brace and driveshaft, tfs 195cc heads, cc 1.6 stainless roller rockers, cola 3.48 forged steel crankshaft, lunati 6.0"forged connecting rods, wiseco forged pistons. If i think more i will list it.
Asking $8,000.00, open to offers.
Going to try and upload pics.
917-842-0835
thanks
matt
#4
Pro
Thread Starter
The hose had a hole and the system was empty and the oil was leaking from the compressor. Oil was getting under the hood. Removed the compressor, condenser and hoses. Hardly use the car so I was not prepared to spend the money to fix the A/C.
#7
Pro
Thread Starter
#12
Racer