F/S 1999 Pewter C5 Coupe LS2 408 Auto
11-08-2008, 01:10 PM
#1
Racer
Thread Starter
Member Since: Aug 2001
Location: Clarksville MD
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
F/S 1999 Pewter C5 Coupe LS2 408 Auto
1999 Pewter Corvette Coupe Auto Hi perf engine and trans -
100,7xx miles Iron Block LQ9 (Iron Block LS2) 408 and rebuilt (heavy-duty) 6,000 miles ago.
Trans just rebuilt
Diamond Racing Forged Flat Top Pistons Eagle Connecting Rods, Diamond Pro-Select Rings, 4" Eagle Forged Crankshaft,
Chromemoly Pushrods, Comp Hydraulic Roller Lifters
11:1 compression, pump gas, no detonation.
New rotors (cryo-stop) and pads (hawk)
Fast90mm throttle body and Fast 90MM intake.
TPIS Headers, GHL exhaust, electric cut-outs.
Stage II Heads originally from SLP. Valves unshrouded for bigger bore.
FBody Central (http://www.fbodycentral.com/).
GHL Bullet Series Exhaust with Quad 4 inch double wall tips
Harmonic Balancer/Underdrive Pulley
Vigilante 9.5" 3-Disc Torque Converter 3600 stall
38# Bosch Fuel Injectors
Comp Double Roller Timing Chain
Ported & Shimmed LS6 Oil Pump
Comp Cam 233/239 at 114 Lobe Separation
3:73 Getrag rear. Custom tune. Very streetable.
20" Z06 wheels on the back, 19" on the front.
Interior still stock. No rollbar, so it has only been down the track twice with new set-up. They keep kicking me out. Ran 11.25 @121.
Includes pair of 18" Z06 wheels with Nitto 555 drag radials.
With the right weather and driver, this is a 10 second car.
Small tear in drivers seat. New LED's in stereo and HVAC head unit. Body is good, but not perfect.
Over $12,000 invested just in motor and trans.
Asking $18,000
Columbia MD area
email mowrey96@gmail.com
cell-410-212-7077 serious only
pix
http://s399.photobucket.com/albums/pp72/mowrey96/
100,7xx miles Iron Block LQ9 (Iron Block LS2) 408 and rebuilt (heavy-duty) 6,000 miles ago.
Trans just rebuilt
Diamond Racing Forged Flat Top Pistons Eagle Connecting Rods, Diamond Pro-Select Rings, 4" Eagle Forged Crankshaft,
Chromemoly Pushrods, Comp Hydraulic Roller Lifters
11:1 compression, pump gas, no detonation.
New rotors (cryo-stop) and pads (hawk)
Fast90mm throttle body and Fast 90MM intake.
TPIS Headers, GHL exhaust, electric cut-outs.
Stage II Heads originally from SLP. Valves unshrouded for bigger bore.
FBody Central (http://www.fbodycentral.com/).
GHL Bullet Series Exhaust with Quad 4 inch double wall tips
Harmonic Balancer/Underdrive Pulley
Vigilante 9.5" 3-Disc Torque Converter 3600 stall
38# Bosch Fuel Injectors
Comp Double Roller Timing Chain
Ported & Shimmed LS6 Oil Pump
Comp Cam 233/239 at 114 Lobe Separation
3:73 Getrag rear. Custom tune. Very streetable.
20" Z06 wheels on the back, 19" on the front.
Interior still stock. No rollbar, so it has only been down the track twice with new set-up. They keep kicking me out. Ran 11.25 @121.
Includes pair of 18" Z06 wheels with Nitto 555 drag radials.
With the right weather and driver, this is a 10 second car.
Small tear in drivers seat. New LED's in stereo and HVAC head unit. Body is good, but not perfect.
Over $12,000 invested just in motor and trans.
Asking $18,000
Columbia MD area
email mowrey96@gmail.com
cell-410-212-7077 serious only
pix
http://s399.photobucket.com/albums/pp72/mowrey96/
Last edited by mowrey96; 12-29-2008 at 11:02 AM. Reason: added detail
11-11-2008, 11:37 PM
#5
Melting Slicks
Maybe I'll have to sell all of my cars to even think about getting this one...
Then fly to MD maybe.
Free bump for something that sounds like a killer deal...
11-24-2008, 07:51 PM
#11
Temporary Hold
Member Since: Aug 2006
Location: www.modular-concept.com www.flatoutimaging.com
Posts: 7,711
Likes: 0
Received 7 Likes
on
6 Posts
Took a look at this car tonight with a co worker!
All I can say is some ones going to get an awesome car!
My coworker is new to the sports car world and I personally think this car is just a bit much for him to start with power wise.
That being said this thing is awesome, and priced great considering the brand new motor in the car!
Anyways I just wanted to bump this for a great seller, and anyone else who might be thinking about this car!
Thanks for having us over to check out your baby Scott!
Andy Wheeler
Md Events Coordinator
All I can say is some ones going to get an awesome car!
My coworker is new to the sports car world and I personally think this car is just a bit much for him to start with power wise.
That being said this thing is awesome, and priced great considering the brand new motor in the car!
Anyways I just wanted to bump this for a great seller, and anyone else who might be thinking about this car!
Thanks for having us over to check out your baby Scott!
Andy Wheeler
Md Events Coordinator