2004 A4 coupe, 20K miles, Lingenfelter head/cam, Tigershark front end
04-04-2011, 06:23 PM
#1
Advanced
Thread Starter
Member Since: Sep 2009
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
NEW PRICE!! $21K!! 2004 A4 coupe, 20K miles, Lingenfelter head/cam, Tigershark
NEW PRICE!!!! $21,000 THIS IS THE LOWEST I CAN GO!!!! NEED TO SELL THIS!!!!
For Sale is my 2004 Corvette Coupe! The color is Magnetic Red, it's and automatic. and the mileage is just under 21,000. I am the second owner of this vehicle and purchased it from Rick Hendrick Chevrolet in Charleston, SC which is where it was also sold to the original owner. When I purchased the car it only had about 5,000 miles on it and in the 3.5 years of owning it I've only driven it about 15,000 miles.
Shortly after buying the car I sent it to Lingenfelter Performance Engineering in Decatur, IN to have them install their head & cam package.
The package included:
- Lingenfelter CNC porting & polishing of LS1 cylinder heads
- Competition Cams valve springs
- 2.02" / 1.57" Stainless steel intake/exhaust valves
- Three angle valve job, set correct spring tensions & heights
- Port matched LS1 intake manifold
- Ported and polished throttle body
- Lingenfelter designed Competition Cams hydraulic roller camshaft
- Modified oil pump assembly
- 160 degree thermostat
- Corsa stainless steel exhaust
- Blackwing washable air inlet system
- Chassis dyno testing after installation
- Lingenfelter certificate of authenticity
I also had them install Kooks long tube headers, an off road X pipe, a 2800 stall converter, and a set of Pfadt coil overs.
Later I took the car to MTI Racing in Atlanta, GA where a 3.42 rear diff was installed to replace the wimpy 2.73 that came in the car stock.
The car is currently rolling on a set of GM optional magnesium wheels, but I also have a brand new set of Z06 wheels to go with the car but no tires for them.
Finally, this C5 Corvette has had a custom front end installed by Jamison's Custom Corvette in Charleston, SC. This is the front bumper and lip kit from the Tiger Shark kit.
Here's a link to the Flikr album:
http://www.flickr.com/photos/6140325...th/5589877049/
The car has dyno'd 426 ponies to the rear wheels. Thanks for looking!
For Sale is my 2004 Corvette Coupe! The color is Magnetic Red, it's and automatic. and the mileage is just under 21,000. I am the second owner of this vehicle and purchased it from Rick Hendrick Chevrolet in Charleston, SC which is where it was also sold to the original owner. When I purchased the car it only had about 5,000 miles on it and in the 3.5 years of owning it I've only driven it about 15,000 miles.
Shortly after buying the car I sent it to Lingenfelter Performance Engineering in Decatur, IN to have them install their head & cam package.
The package included:
- Lingenfelter CNC porting & polishing of LS1 cylinder heads
- Competition Cams valve springs
- 2.02" / 1.57" Stainless steel intake/exhaust valves
- Three angle valve job, set correct spring tensions & heights
- Port matched LS1 intake manifold
- Ported and polished throttle body
- Lingenfelter designed Competition Cams hydraulic roller camshaft
- Modified oil pump assembly
- 160 degree thermostat
- Corsa stainless steel exhaust
- Blackwing washable air inlet system
- Chassis dyno testing after installation
- Lingenfelter certificate of authenticity
I also had them install Kooks long tube headers, an off road X pipe, a 2800 stall converter, and a set of Pfadt coil overs.
Later I took the car to MTI Racing in Atlanta, GA where a 3.42 rear diff was installed to replace the wimpy 2.73 that came in the car stock.
The car is currently rolling on a set of GM optional magnesium wheels, but I also have a brand new set of Z06 wheels to go with the car but no tires for them.
Finally, this C5 Corvette has had a custom front end installed by Jamison's Custom Corvette in Charleston, SC. This is the front bumper and lip kit from the Tiger Shark kit.
Here's a link to the Flikr album:
http://www.flickr.com/photos/6140325...th/5589877049/
The car has dyno'd 426 ponies to the rear wheels. Thanks for looking!
Last edited by bryanthomas; 05-11-2011 at 03:53 PM.
04-08-2011, 10:52 AM
#5
Advanced
Thread Starter
Member Since: Sep 2009
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Oops! Sorry guys been away from the computer! The asking price is $26,500. As for the pics, here is a direct link to the whole set on Flickr:
http://www.flickr.com/photos/6140325...7626329858145/
Thanks for looking guys & please, save the wave!
http://www.flickr.com/photos/6140325...7626329858145/
Thanks for looking guys & please, save the wave!
04-10-2011, 11:37 AM
#7
Intermediate
Member Since: Feb 2007
Location: Charleston SC
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I can vouch, this car was his pride since he got it. It was his passion to selectively buy the right meticulously maintained corvette and have it sent to Lingenfelter.
04-10-2011, 11:43 AM
#8
Drifting
Very beautiful ride, absolutely love the Front Splitter, do you have any interior or under the hood pics, I am very interested!
Thanks!
Thanks!
Last edited by BACNBLK; 04-10-2011 at 11:47 AM.
04-11-2011, 08:57 AM
#9
Advanced
Thread Starter
Member Since: Sep 2009
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
04-12-2011, 10:37 PM
#11
Drifting
05-13-2011, 11:17 AM
#16
Advanced
Thread Starter
Member Since: Sep 2009
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Added more pics to the Flickr set; interior and underhood shots. A potential buyer may be coming from Alambama to check the car and we were emailing before the tornado hit a couple weeks ago. I want to give him a chance to look at it since mother nature detoured him. I'll respond to all the other messages this afternoon. Thanks for your patience guys!
