628 RWHP Stroked and Blown SS..TRADE
12-03-2011, 09:21 PM
#1
Melting Slicks
Thread Starter
628 RWHP Stroked and Blown SS..TRADE
625 rwhp Stroked & Blown Camaro SS BEAST! Car has over $33,000 in Professionally Installed Modifications! SS started life as a one owner always garage never daily driver Loaded SS (no Leather). Full OEM interior with 6 point WELDED IN WOLF Rollcage. Although this car is built for the track, it has less then 10 passes.
MODS INCLUDE:
ENGINE:
395 ci Lunati Stroker Assembly fully FORGED,
ATI Intercooled D1 Supercharger w/ 8 rib (8 psi)
Lingenfelter GT2-3 Blower CAM,
Patriot Performance LQ9 Heads,
A.R.P. Stainless Head bolt Studs
Ported LS6 Intake,
50lbs. Holley Injectors,
In tank Twin Holley Fuel pumps with OEM FUEL lines,
Optima RED TOP Battery,
BMR Battery relocated to Spare tire location w/ SHUT off switch,
BBK 80 MM Billet Throttle Body,
Ported LS6 Manifold
8MM MSD Plug Wires
BMR Throttle BY-PASS
A/C Has been removed and is NOT available
TRANSMISSION:
Rossler Turbo 400 w/ Reverse Valve Body,(Hits hard and Krisp!)
Line Lock (button on steering wheel for easy access)
Tranny Brake, (button on steering wheel for nice easy access)
Tranny cooler w/ braided lines and Earl fittings,
Neil Chance 4000 Stahl Custom Race Converter,
REAR END:
Moser 12 BOLT w/ FULL Spool and 3:73 gears,
Moser T/A Diff. Cover,
Moser Gun Drilled 33 Spline Axles,
Extended Hardened wheel Studs
SUSPENSION:
BMR K Member,
BMRUpper and Lower front Tubular control arms
BMR rear lower Tubular control arms,
BMR TRAC PAK Torque Arm,
BMR Adjustable PAN HARD Bar,
BMRTranny Conversion Crossmember w/ safety loop,
BMR Subframe BOX TUBED Connectors,
BMR DRAG RACE Rear Anti-Roll Bar,
BMR Shock Tower Brace,
BMR weld in relocation lower control arm brackets
QA1 front and rear 12 way adjustable shocks,
QA1 Front 315 Drag Springs,
Qa1 Front shock spacers,
Rear Drag Bags,
EXHAUST:
Coated Hooker Long tube Headers w/ Coated off road pipe and dual cutouts,
Borla Tunable exhaust with electric cut out,
WHEELS:
15x10 rear and 15x4 front Prostar with 26x10.5 Nitto 555 Drag radials.
GAUGES:
Auto meter Ultra Gauges:
TACH
BOOST
ELECTRIC FUEL
AIR/FUEL RATIO
BRAKES;
Power Stop drilled and Slotted front and rear rotors
Power Stop Front and rear Brake Pads,
OEM Calipers
I have 8 pages of Documents and pictures of this build from Exotic Performance Plus who built the entire SS. There are probably many little things I have forgot to mention but you get the idea of what this car is.
TITLE FREE & CLEAR
Z06 trade
call/text Troy @ 1-513-315-7779.
MODS INCLUDE:
ENGINE:
395 ci Lunati Stroker Assembly fully FORGED,
ATI Intercooled D1 Supercharger w/ 8 rib (8 psi)
Lingenfelter GT2-3 Blower CAM,
Patriot Performance LQ9 Heads,
A.R.P. Stainless Head bolt Studs
Ported LS6 Intake,
50lbs. Holley Injectors,
In tank Twin Holley Fuel pumps with OEM FUEL lines,
Optima RED TOP Battery,
BMR Battery relocated to Spare tire location w/ SHUT off switch,
BBK 80 MM Billet Throttle Body,
Ported LS6 Manifold
8MM MSD Plug Wires
BMR Throttle BY-PASS
A/C Has been removed and is NOT available
TRANSMISSION:
Rossler Turbo 400 w/ Reverse Valve Body,(Hits hard and Krisp!)
Line Lock (button on steering wheel for easy access)
Tranny Brake, (button on steering wheel for nice easy access)
Tranny cooler w/ braided lines and Earl fittings,
Neil Chance 4000 Stahl Custom Race Converter,
REAR END:
Moser 12 BOLT w/ FULL Spool and 3:73 gears,
Moser T/A Diff. Cover,
Moser Gun Drilled 33 Spline Axles,
Extended Hardened wheel Studs
SUSPENSION:
BMR K Member,
BMRUpper and Lower front Tubular control arms
BMR rear lower Tubular control arms,
BMR TRAC PAK Torque Arm,
BMR Adjustable PAN HARD Bar,
BMRTranny Conversion Crossmember w/ safety loop,
BMR Subframe BOX TUBED Connectors,
BMR DRAG RACE Rear Anti-Roll Bar,
BMR Shock Tower Brace,
BMR weld in relocation lower control arm brackets
QA1 front and rear 12 way adjustable shocks,
QA1 Front 315 Drag Springs,
Qa1 Front shock spacers,
Rear Drag Bags,
EXHAUST:
Coated Hooker Long tube Headers w/ Coated off road pipe and dual cutouts,
Borla Tunable exhaust with electric cut out,
WHEELS:
15x10 rear and 15x4 front Prostar with 26x10.5 Nitto 555 Drag radials.
GAUGES:
Auto meter Ultra Gauges:
TACH
BOOST
ELECTRIC FUEL
AIR/FUEL RATIO
BRAKES;
Power Stop drilled and Slotted front and rear rotors
Power Stop Front and rear Brake Pads,
OEM Calipers
I have 8 pages of Documents and pictures of this build from Exotic Performance Plus who built the entire SS. There are probably many little things I have forgot to mention but you get the idea of what this car is.
TITLE FREE & CLEAR
Z06 trade
call/text Troy @ 1-513-315-7779.
Last edited by Allthrottleandsomebottle; 12-09-2011 at 09:28 AM. Reason: Trades only in this section please................
12-05-2011, 06:28 PM
#4
Instructor
Member Since: Dec 2009
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
12-05-2011, 06:38 PM
#5
Melting Slicks
Thread Starter
12-06-2011, 09:22 PM
#6
Melting Slicks
Thread Starter
Trade value $18,900
Last edited by Allthrottleandsomebottle; 12-09-2011 at 09:29 AM. Reason: Trades only in this section please............
12-07-2011, 10:50 PM
#9
Melting Slicks
Thread Starter
