99' FRC, Formato's Car, Forged LS2/LS3 Top End
#1
Racer
Thread Starter
Member Since: Nov 2005
Location: Portland OR
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
99' FRC, Formato's Car, Forged LS2/LS3 Top End
This was Jeremy Formato's personal car for almost 7 years. He modded it and tuned it. The car has almost exactly 77k miles on the chassis now. The LS2 and new T56 were installed less than 13k miles ago. I purchased it with the intent of driving it occasionally during the summer. I purchased it in January of 2013, I started a new job at the same time. I travel a lot more than I was anticipating and the car has sat (also due to the NW weather). I simply start it up and drive it around the block a couple days a week and leave the battery on a tender. I think I put around 600 miles on it? I honestly spent more time waxing it than driving it which is a shame. Was only caught in the rain twice. AC works exceptionally well and the car stays plenty cool.
It truly is a stunning looking car and drives great. The paint is near perfect with the front end getting a respray to correct for rock chips ~3k miles ago. The car will come with a full fresh fluid change front to back (literally as I type), new gasket set for the headers (they were blown out and new OEM GM gaskets are on the car), new spark plugs, and a pre-purchase inspection from PSI Motorsports (tunedbypsi.com). The car was dynoed a week ago by John Reed (tuner of UGR's Gallardo's/Aventadors), he didn't adjust the tune at all just simply looked over it for the new owner. Car made ~460whp. It does not have the Z06 badging nor does it have the faux carbon fiber near the shifter.
PLEASE TEXT or call if you are truly interested and have financing available. Located near Portland, Oregon.
Asking $18k OBO. Jon @ 503-400-1077
Performance Mods
Cam-231/239 617/623 114+4
VaraRam CAI
Ported LS3 TB (Formato)
Ported LS3 Intake (Formato)
Ported LS3 Heads (Formato)
ZR1 52lb injectors
Forged Mahle Pistons
364ci 6L LS2 block
Ported oil pump
160 Thermostat
LS7 oil cooler & ECS adapter
ASP UD Pulley
Centerforce DFX clutch
Dynatech Headers 1 3/4" w/ Hi Flow Cats
B&B Bullets Exhaust
3.90 Differential Built w/ LPE Hardened Axle
Breathless Solid torque tube couplers
Professionally built Trans w/ Kirban shifter
C6 Z06 shocks and sway bars
Appearance Mods
C5 Z06 screened brake duct
HID's
Gauge Cluster Bezels
Partition
Painted Rear Fascia
Euro Taillights
Tinted
Powder Coated Intake manifold
Coil Relocation
Painted Valve Covers
Black Out Kit (can be removed)
It truly is a stunning looking car and drives great. The paint is near perfect with the front end getting a respray to correct for rock chips ~3k miles ago. The car will come with a full fresh fluid change front to back (literally as I type), new gasket set for the headers (they were blown out and new OEM GM gaskets are on the car), new spark plugs, and a pre-purchase inspection from PSI Motorsports (tunedbypsi.com). The car was dynoed a week ago by John Reed (tuner of UGR's Gallardo's/Aventadors), he didn't adjust the tune at all just simply looked over it for the new owner. Car made ~460whp. It does not have the Z06 badging nor does it have the faux carbon fiber near the shifter.
PLEASE TEXT or call if you are truly interested and have financing available. Located near Portland, Oregon.
Asking $18k OBO. Jon @ 503-400-1077
Performance Mods
Cam-231/239 617/623 114+4
VaraRam CAI
Ported LS3 TB (Formato)
Ported LS3 Intake (Formato)
Ported LS3 Heads (Formato)
ZR1 52lb injectors
Forged Mahle Pistons
364ci 6L LS2 block
Ported oil pump
160 Thermostat
LS7 oil cooler & ECS adapter
ASP UD Pulley
Centerforce DFX clutch
Dynatech Headers 1 3/4" w/ Hi Flow Cats
B&B Bullets Exhaust
3.90 Differential Built w/ LPE Hardened Axle
Breathless Solid torque tube couplers
Professionally built Trans w/ Kirban shifter
C6 Z06 shocks and sway bars
Appearance Mods
C5 Z06 screened brake duct
HID's
Gauge Cluster Bezels
Partition
Painted Rear Fascia
Euro Taillights
Tinted
Powder Coated Intake manifold
Coil Relocation
Painted Valve Covers
Black Out Kit (can be removed)
#9
#10
Intermediate
Member Since: Oct 2007
Location: yardley pa
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Have you done any mods to the car since you got it? Are the rear screened brake duct functional? Dose it stilll have the 2 stage dry nitrous system? If so where is the bottle mounted and can i get a picture of it.
Thanks
Thanks
Last edited by stmz28; 09-01-2013 at 10:38 AM.
#12
Racer
Thread Starter
Member Since: Nov 2005
Location: Portland OR
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Car is still available and can be optioned with a Nitrous Outlet plate system with Nitrous Outlet C5 standalone tank, can also be installed/tuned on whatever jetting you would like by the illustrious John Reed of JohnReedRacing.com
I will re-iterate, the car does NOT have nitrous on it currently. Kit is brand new in a box. Just giving possible buyers another option/enticement.
I will re-iterate, the car does NOT have nitrous on it currently. Kit is brand new in a box. Just giving possible buyers another option/enticement.
#14
Yeah...I wish it wasn't so far away too. Looks like a great car. If I get tired of looking for something close by, I might have to consider shipping it...need to get some quotes.
#16
Racer
Thread Starter
Member Since: Nov 2005
Location: Portland OR
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Bump.
Just for the record, if you like the car and are serious don't tell me about other cars around you that you want or are looking at. I don't care.
Car has some new fun mods for those interested.
Just for the record, if you like the car and are serious don't tell me about other cars around you that you want or are looking at. I don't care.
Car has some new fun mods for those interested.