FS: 2001 h/c/I 6 speed vette 548hp
#1
Instructor
Thread Starter
Member Since: Jan 2013
Location: Moscow Pa
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2001 h/c/I 6 speed vette 548hp
Well I found a truck I'm very interested in so I'm trying to sell the car quick. Looking for 17,500. If I remove the heads and a few small items I would be willing to take 15,000
2001 matte black corvette 6 speed targa top for sale
The odometer reads 47k
The car has
-OBX long tube headers
-OBX x pipe
-SLP loudmouth exhaust
-Texas speed MS4 cam
-PRC 227cc heads with 62cc domes
-RAM 650ft/lb clutch
-Lunati street and performance lifters
-Lingenfelter 255lph fuel pump
-Siemens 60lb injectors
-160 degree stat
-melling high volume oil pump
-ARP head studs
-ARP crank bolt
-Nitrous oxide 75hp shot
-comp cams rocker arm trunion kit
-comp cams push rods
-K&N cold air
-3 rib rear with 3.42 gears
-90mm throttle body (currently off car)
-90mm fast intake (currently off car)
-LS6 intake
-B&M short throw shifter
-lowering kit
-19" MSR wheels
-custom painted valve covers
-black out light kit
-new harmonic balancer
-new knock sensors
I bought this car last year before winter and decided to build the car. All gaskets were gm performance gaskets and almost all parts were ordered from Hinson racing or Texas speed. While the motor was apart we replaced the knock sensors. Replaced all gaskets. I recently finished this car and took it down to East Coast superchargers to have them dyno tune the motor because they specialize in ls1's and especially corvettes. The car made 453hp all motor and 548hp spraying nitrous. The car runs extremely well and the only reason I'm selling it is because I need a truck.
So with that being said I'm looking to get 17,500 obo with all the extras or I would be willing to trade for a duramax or a 3rd gen stick cummins. I'd prefer them to be lifted.
Call email or text.
570-479-3838
Please don't waist my time if your not truly interested. I will not be giving out free rides
2001 matte black corvette 6 speed targa top for sale
The odometer reads 47k
The car has
-OBX long tube headers
-OBX x pipe
-SLP loudmouth exhaust
-Texas speed MS4 cam
-PRC 227cc heads with 62cc domes
-RAM 650ft/lb clutch
-Lunati street and performance lifters
-Lingenfelter 255lph fuel pump
-Siemens 60lb injectors
-160 degree stat
-melling high volume oil pump
-ARP head studs
-ARP crank bolt
-Nitrous oxide 75hp shot
-comp cams rocker arm trunion kit
-comp cams push rods
-K&N cold air
-3 rib rear with 3.42 gears
-90mm throttle body (currently off car)
-90mm fast intake (currently off car)
-LS6 intake
-B&M short throw shifter
-lowering kit
-19" MSR wheels
-custom painted valve covers
-black out light kit
-new harmonic balancer
-new knock sensors
I bought this car last year before winter and decided to build the car. All gaskets were gm performance gaskets and almost all parts were ordered from Hinson racing or Texas speed. While the motor was apart we replaced the knock sensors. Replaced all gaskets. I recently finished this car and took it down to East Coast superchargers to have them dyno tune the motor because they specialize in ls1's and especially corvettes. The car made 453hp all motor and 548hp spraying nitrous. The car runs extremely well and the only reason I'm selling it is because I need a truck.
So with that being said I'm looking to get 17,500 obo with all the extras or I would be willing to trade for a duramax or a 3rd gen stick cummins. I'd prefer them to be lifted.
Call email or text.
570-479-3838
Please don't waist my time if your not truly interested. I will not be giving out free rides