2004 Z06 - Z16 Commemorative - Houston, Tx
#1
Intermediate
Thread Starter
2004 Z06 - Z16 Commemorative - Houston, Tx
2004 Z06 Z16 Commemorative
#290 of 2025.
70000 miles
I have had the itch to try a C6Z06 for a while and now I finally have the means. The wife says I can’t have two Corvettes at once (have to keep her happy haha) so my beloved Z16 has to go. I have owned the car for about four and a half years and it has never given me a bit of trouble. It has been beautifully reliable. Fluids have been changed religiously based on either mileage or time, whichever came first. This was my weekend / nice day toy and has been garaged all its life both by me and its previous owner. A/C is ice cold. Everything works as it should. No fluid leaks whatsoever. Tires are currently Nitto NT05 front and BFG Rivals on the rear. I’d estimate them all at approximately 65%-70% life remaining. The only negative on the car is the small scrape on the rear right quarter, which you can see in the photos, from some inconsiderate person that didn’t leave a note in a parking lot recently. Only the paint is hurt in this spot with absolutely no cracks or real damage to the bumper so it can be easily fixed.
All mods were done by Henderson Performance Technologies in New Braunfels, Tx. Tuned conservatively by England Green here in Houston. The car put down 450rwhp/423rwtq on a Mustang dyno which could be increased significantly by addition of a FAST intake if you so choose. Complete mod list is shown below.
Price is $20,500 OBO. Title in hand. Never wrecked. If you have any questions I can be reached through the forum, by e-mail, or by phone (call or text). Thanks for looking.
Zach
zsdriver@gmail.com
281-455-1126
________________________________________ _________________________________
MODS:
ETP 215cc Heads
G5X3 Cam on 114
LG Longtube Headers
LG Off Road X Pipe
Borla Stinger Catback
Comp Cams 921 Springs
Anti Venom CF Cold Air Intake
ARP Head Bolts
Nasty Performance Valve Covers
Jesel Pushrods
Ported Oil Pump
Double Roller Timing Chain
Spec Stage 3 Clutch
Synister Billet PS Pulley
Ported & Polished TB
Throttle Body Bypass w SS Braided Line
Cajundude Catch Can
Lingenfelter Hardened Output Shaft
DTE Differential Brace
Anti Venom Shift Mod
Cross Drilled and Slotted Rotors
Elite Chassis Plate
Frame saver wheels
Tinted Windows
Shorty Antenna
Hurst Shifter
MGW Shift and E Brake *****
Z06 Badged Partition
Z06 Exhaust Plate
Dustop Corvette Car Cover
#290 of 2025.
70000 miles
I have had the itch to try a C6Z06 for a while and now I finally have the means. The wife says I can’t have two Corvettes at once (have to keep her happy haha) so my beloved Z16 has to go. I have owned the car for about four and a half years and it has never given me a bit of trouble. It has been beautifully reliable. Fluids have been changed religiously based on either mileage or time, whichever came first. This was my weekend / nice day toy and has been garaged all its life both by me and its previous owner. A/C is ice cold. Everything works as it should. No fluid leaks whatsoever. Tires are currently Nitto NT05 front and BFG Rivals on the rear. I’d estimate them all at approximately 65%-70% life remaining. The only negative on the car is the small scrape on the rear right quarter, which you can see in the photos, from some inconsiderate person that didn’t leave a note in a parking lot recently. Only the paint is hurt in this spot with absolutely no cracks or real damage to the bumper so it can be easily fixed.
All mods were done by Henderson Performance Technologies in New Braunfels, Tx. Tuned conservatively by England Green here in Houston. The car put down 450rwhp/423rwtq on a Mustang dyno which could be increased significantly by addition of a FAST intake if you so choose. Complete mod list is shown below.
Price is $20,500 OBO. Title in hand. Never wrecked. If you have any questions I can be reached through the forum, by e-mail, or by phone (call or text). Thanks for looking.
Zach
zsdriver@gmail.com
281-455-1126
________________________________________ _________________________________
MODS:
ETP 215cc Heads
G5X3 Cam on 114
LG Longtube Headers
LG Off Road X Pipe
Borla Stinger Catback
Comp Cams 921 Springs
Anti Venom CF Cold Air Intake
ARP Head Bolts
Nasty Performance Valve Covers
Jesel Pushrods
Ported Oil Pump
Double Roller Timing Chain
Spec Stage 3 Clutch
Synister Billet PS Pulley
Ported & Polished TB
Throttle Body Bypass w SS Braided Line
Cajundude Catch Can
Lingenfelter Hardened Output Shaft
DTE Differential Brace
Anti Venom Shift Mod
Cross Drilled and Slotted Rotors
Elite Chassis Plate
Frame saver wheels
Tinted Windows
Shorty Antenna
Hurst Shifter
MGW Shift and E Brake *****
Z06 Badged Partition
Z06 Exhaust Plate
Dustop Corvette Car Cover
Last edited by Zach06; 05-24-2015 at 08:36 PM.
#4
6th Gear
Member Since: Mar 2015
Location: Atlanta Georgia
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Very clean and well put-together z16! Suprised there hasn't been more chatter about your car.
How many miles on the mods?
(Dang wives! Promoting moderation and reason!)
GL with the sale!
How many miles on the mods?
(Dang wives! Promoting moderation and reason!)
GL with the sale!
#9
Intermediate
Thread Starter
Hello Zack,
Is thsi unit still available and what is the asking price please?
dennis_tap@lesstanford.com
Is thsi unit still available and what is the asking price please?
dennis_tap@lesstanford.com
#13
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
gorgeous car, great price, tasteful mod's.... This should go quick!
#18
Intermediate
Thread Starter
The car has now been sold. I will miss it terribly, but can now start looking for a Lemans blue C6Z06 to ease my pain. I just love this color haha.
Zach