2001 Supercharged Z06
#1
Melting Slicks
Thread Starter
Member Since: Mar 2001
Location: western colorado colorado
Posts: 2,423
Likes: 0
Received 0 Likes
on
0 Posts
2001 Supercharged Z06
I am living in Western Colorado now and will consider a trade for a Jeep or Extended cab truck 4 x 4.......
This car was purchased new by me in February 2001... Silver black interior..It has been garaged since new, the mileage is 54225 ...I have done 7 cross country trips, so most of the mileage has been cruising on the open roads...If it matters, my mileage on the highway is 25 MPG...This car has NOT been raced or abused, i am retired, and not into the racing scene...There is NO damage, now or ever to the vehicle, paint is excellent as is the interior...It is stock in appearance, tires , rims, interior, exterior, other than 3 supercharged decals...The engine was built by Chris and Doug at East Coast Supercharging, and they did an awesome job building this engine...The modifications are listed below..
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...
This car was purchased new by me in February 2001... Silver black interior..It has been garaged since new, the mileage is 54225 ...I have done 7 cross country trips, so most of the mileage has been cruising on the open roads...If it matters, my mileage on the highway is 25 MPG...This car has NOT been raced or abused, i am retired, and not into the racing scene...There is NO damage, now or ever to the vehicle, paint is excellent as is the interior...It is stock in appearance, tires , rims, interior, exterior, other than 3 supercharged decals...The engine was built by Chris and Doug at East Coast Supercharging, and they did an awesome job building this engine...The modifications are listed below..
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...
Last edited by dbvettez06; 06-17-2016 at 05:36 PM. Reason: Will consider trades....
#2
Pro
need help with pictures
This car was purchased new by me in February 2001... Silver black interior..It has been garaged since new, the mileage is 54225 ...I have done 7 cross country trips, so most of the mileage has been cruising on the open roads...If it matters, my mileage on the highway is 25 MPG...This car has NOT been raced or abused, i am retired, and not into the racing scene...There is NO damage, now or ever to the vehicle, paint is excellent as is the interior...It is stock in appearance, tires , rims, interior, exterior, other than 3 supercharged decals...The engine was built by Chris and Doug at East Coast Supercharging, and they did an awesome job building this engine...The modifications are listed below..
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...
#4
Le Mans Master
Sounds like an awesome car! Just wondering, though...
"This car has NOT been raced or abused, i am retired, and not into the racing scene"
Why did you invest so much money in a supercharged stroker build?
"This car has NOT been raced or abused, i am retired, and not into the racing scene"
Why did you invest so much money in a supercharged stroker build?
#6
Melting Slicks
Thread Starter
Member Since: Mar 2001
Location: western colorado colorado
Posts: 2,423
Likes: 0
Received 0 Likes
on
0 Posts
It became an addiction One thing led to another, mods are infectious....
#8
Intermediate
nice
last car i bought otta denver(04 cobra) dude said the paint was mint. i had it shipped. got it home....a 5 gallon pale full of rocks and sand came out from under it. and the paint was nasty rock chipped...,colorado scares me...lol. is this thing show quality??/
#13
vet
This car was purchased new by me in February 2001... Silver black interior..It has been garaged since new, the mileage is 54225 ...I have done 7 cross country trips, so most of the mileage has been cruising on the open roads...If it matters, my mileage on the highway is 25 MPG...This car has NOT been raced or abused, i am retired, and not into the racing scene...There is NO damage, now or ever to the vehicle, paint is excellent as is the interior...It is stock in appearance, tires , rims, interior, exterior, other than 3 supercharged decals...The engine was built by Chris and Doug at East Coast Supercharging, and they did an awesome job building this engine...The modifications are listed below..
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...
Forged 382 stroker engine..
Callies Forged rods
Callies Forged Crank
Diamond Pistons
9.75 Compression ratio
Blower Comp Cam220-226 /114 LSA
Heads CNC Ported M2 race systems 2.02 1.6 Valves
ARP Studs
Roll Master Double Roller Timing Chain
Ported Oil Pump
GM MLS Head Gaskets
TPIS Headers
60 LB Motron Injectors
Lingenfelter Fuel Pump/MSD Bosst a pump
RPS SIngle Disc CLutch
Hurst shifter linkage
A&A Jumbo Intercooler
A&A 7 Rib Tensioner
ATI D1SC Supercharger 12 lbs boost
There may be more but this is the list i have written down....I have had NO driveability issues since they did this work back in the summer of 2008 ....I have driven approximately 8500 miles since the engine was installed...
The engine produces 745 HP and 735 TQ (640 rwhp, 630 rwtq)
I am asking $28500 for the car, and WILL consider a trade for a stock C6...
Need help posting pictures...