FS:Asking 21,000 for 2001 Z06 440rwhp 460rwtq 19 CCW SP20a / stroker 3k miles
#1
Pro
Thread Starter
FS:Asking 21,000 for 2001 Z06 440rwhp 460rwtq 19 CCW SP20a / stroker 3k miles
CLEAN NEW 2001 Stroker Z06
$21,000
Dallas, GA (30132)
lets start with parts less than 3k miles on them:
- 383 Texas Speed Stroker motor and all the fixings (with paperwork) list of other items will provide in picture to go along with the new block and heads
- Powder Coated Gloss Black CCW SP20a 19x11 rears and 19x8 fronts with Nitto INVO tires
- Drilled and slotted rotors on front with new break pads. I do have the same for the rear just never installed yet. Will come with sale of car.
- seems like I am leaving something out... but lets go into the details...
2001 Black on Black on Black Z06. transplant from Texas speed into a 383 Stroker setup for 6-12 lbs of boost. My plan was to super charge it.
- has new AC telco battey
New custom Comp Cam Spring kit
custom grind cam... I know everyone will want to know the specs... I have the paperwork and will have to get thoses
Roller lifters
Rods
New Oil Pump
Head Installation kit and head work refresh port polished from Gary Grimes at Grimes Performance in Atlanta
Front and Rear seals
crank bolt
Pilot bearing
TR6 Plugs
Timing cover gasket
Accessory belt
refresh on A/C
Dino Tuning
Had to mount and bal and align front tires
Kooks Headers
Kooks Xpipe
Borla Stinger exhaust
- GM LS7 Clutch kit Disc/ Pressure/ FlyWheel
-GM Slave Cylinder for C5
- GM Pilot Bearing
- professional installation
Halltech CAI
Lower bolts to lower car 2/3 inc in rear and 1/2 in front ... If I can remember correctly.. can still be adjusted if needed for lower stant
Did have Training wheels installed on front for steep incline driving so will not scrape front of car
Car on a conservative 92 oct dyno tune made 440RWHP and 460RWTQ
Rating on interior and exterior of car:
Interior I would rate an 9 out of 10 being perfect.... no rips or tears.. leather is in excellent condition. did purchase new center console due to prior had broken clips and worn.
Exterior: 9 out of 10... this is a garage queen., some washing spot on paint and swirls from being black paint. (given) no dents, or dings... a good detail would make this a 10 no doubt. I do have reference on this car that it has not been mistreated in any way.
Car has not been dragged raced, abused in any way shape or form. Only reason I am selling is all the work don't to the car above has only seen 3000 miles or less in a matter of 3 years. I have 2 new kids now who cannot ride in the car. It stays in the garage. When all the work was completed it is on the paperwork to have 79000 miles and now have 81500 since 2013.
Hope this goes to a good home who can take it to shows and show it off, and keep it in the garage like she loves! Hate to see it go, but I would rather have the money to put toward a house for my kids! No JOY RIDES... SERIOUS PEOPLE ONLY!
Oh yea, only reason for the replacement of the block is I wanted more speed, plus I have a lifter seize up on me... causing lots of issues... my oil pump was failing... I have lots of pictures including a video, the vin number etc. Not looking to trade only sell due to purchase of a home. This is what god have laid out for me to do. I hope we can find it a good home. I am located in Acworth, GA!!!
Thank you
7705439991 Text preferred
or email jackie.harrisjr@comcast.net
$21,000
Dallas, GA (30132)
lets start with parts less than 3k miles on them:
- 383 Texas Speed Stroker motor and all the fixings (with paperwork) list of other items will provide in picture to go along with the new block and heads
- Powder Coated Gloss Black CCW SP20a 19x11 rears and 19x8 fronts with Nitto INVO tires
- Drilled and slotted rotors on front with new break pads. I do have the same for the rear just never installed yet. Will come with sale of car.
- seems like I am leaving something out... but lets go into the details...
2001 Black on Black on Black Z06. transplant from Texas speed into a 383 Stroker setup for 6-12 lbs of boost. My plan was to super charge it.
- has new AC telco battey
New custom Comp Cam Spring kit
custom grind cam... I know everyone will want to know the specs... I have the paperwork and will have to get thoses
Roller lifters
Rods
New Oil Pump
Head Installation kit and head work refresh port polished from Gary Grimes at Grimes Performance in Atlanta
Front and Rear seals
crank bolt
Pilot bearing
TR6 Plugs
Timing cover gasket
Accessory belt
refresh on A/C
Dino Tuning
Had to mount and bal and align front tires
Kooks Headers
Kooks Xpipe
Borla Stinger exhaust
- GM LS7 Clutch kit Disc/ Pressure/ FlyWheel
-GM Slave Cylinder for C5
- GM Pilot Bearing
- professional installation
Halltech CAI
Lower bolts to lower car 2/3 inc in rear and 1/2 in front ... If I can remember correctly.. can still be adjusted if needed for lower stant
Did have Training wheels installed on front for steep incline driving so will not scrape front of car
Car on a conservative 92 oct dyno tune made 440RWHP and 460RWTQ
Rating on interior and exterior of car:
Interior I would rate an 9 out of 10 being perfect.... no rips or tears.. leather is in excellent condition. did purchase new center console due to prior had broken clips and worn.
Exterior: 9 out of 10... this is a garage queen., some washing spot on paint and swirls from being black paint. (given) no dents, or dings... a good detail would make this a 10 no doubt. I do have reference on this car that it has not been mistreated in any way.
Car has not been dragged raced, abused in any way shape or form. Only reason I am selling is all the work don't to the car above has only seen 3000 miles or less in a matter of 3 years. I have 2 new kids now who cannot ride in the car. It stays in the garage. When all the work was completed it is on the paperwork to have 79000 miles and now have 81500 since 2013.
Hope this goes to a good home who can take it to shows and show it off, and keep it in the garage like she loves! Hate to see it go, but I would rather have the money to put toward a house for my kids! No JOY RIDES... SERIOUS PEOPLE ONLY!
Oh yea, only reason for the replacement of the block is I wanted more speed, plus I have a lifter seize up on me... causing lots of issues... my oil pump was failing... I have lots of pictures including a video, the vin number etc. Not looking to trade only sell due to purchase of a home. This is what god have laid out for me to do. I hope we can find it a good home. I am located in Acworth, GA!!!
Thank you
7705439991 Text preferred
or email jackie.harrisjr@comcast.net
Last edited by ls2SS; 08-16-2016 at 11:53 AM. Reason: Change title