FS: 2004 Z06; ~81K Miles; Torch Red; Alabama
#1
Instructor
Thread Starter
FS: 2004 Z06; ~81K Miles; Torch Red; Alabama; New Pictures!
I have for sale my 2004 Z06 with approximately 81,000 miles; VIN: 1G1YY12S145118432. I bought this car back in 2009 and have had absolutely no mechanical issues with it. The engine is completely stock.
The car was hit by a deer on the right side a few years ago. This resulted in a new windshield, new passenger door cover and mirror, and a new passenger fender. The front bumper cover was replaced after hitting a raccoon. The damage was all cosmetic. There is one visual flaw with the car; there is some paint chipping on the front bumper (see pics below). The car has a clean Carfax as the damage was not not significant.
Now the good stuff. The car currently has 18" x 9.5" front and 19" x 11" rear iForged TE-10s with a matte black textured finish. The tires on these wheels are practically new (very little wear). The car will also come with a set of Alcoa C5 Z06 wheels with BFG KDWs. I also installed Pfadt Featherlight adjustible coilovers, StopTech stainless steel braided brake lines, an LG Motorsports short shifter, Kenwood radio, RadioFlyer projector headlights, and RadioFlyer LED DRLs. I also have the stock suspension and stock radio.
I am asking $19,000 OBO. This price includes everything.
$17,000 OBO without the iForged wheels.
The car was hit by a deer on the right side a few years ago. This resulted in a new windshield, new passenger door cover and mirror, and a new passenger fender. The front bumper cover was replaced after hitting a raccoon. The damage was all cosmetic. There is one visual flaw with the car; there is some paint chipping on the front bumper (see pics below). The car has a clean Carfax as the damage was not not significant.
Now the good stuff. The car currently has 18" x 9.5" front and 19" x 11" rear iForged TE-10s with a matte black textured finish. The tires on these wheels are practically new (very little wear). The car will also come with a set of Alcoa C5 Z06 wheels with BFG KDWs. I also installed Pfadt Featherlight adjustible coilovers, StopTech stainless steel braided brake lines, an LG Motorsports short shifter, Kenwood radio, RadioFlyer projector headlights, and RadioFlyer LED DRLs. I also have the stock suspension and stock radio.
I am asking $19,000 OBO. This price includes everything.
$17,000 OBO without the iForged wheels.
Last edited by V2lude; 11-28-2016 at 11:09 AM. Reason: Updating description.
#2
Instructor
I hate being broke. Right location. . .Good color. . . . .No cash. haha Good luck with sale. I am sure it won't last long.
The following users liked this post:
V2lude (08-27-2016)
#6
Instructor
Thread Starter
To the top!
I recently listed the iForged TE-10's and the LG Motorsports exhaust separately.
iForged TE-10's: https://www.corvetteforum.com/forums...0-w-tires.html
LG 3" Exhaust: https://www.corvetteforum.com/forums...3-exhaust.html (Sold)
I recently listed the iForged TE-10's and the LG Motorsports exhaust separately.
iForged TE-10's: https://www.corvetteforum.com/forums...0-w-tires.html
LG 3" Exhaust: https://www.corvetteforum.com/forums...3-exhaust.html (Sold)
Last edited by V2lude; 10-20-2016 at 02:22 PM.
#7
Instructor
Someone please buy this car so I can stop thinking about it.
The following users liked this post:
V2lude (09-26-2016)
The following users liked this post:
V2lude (10-20-2016)
#19
Instructor
Thread Starter
Bump! I just ordered the two interior trim pieces that were discolored by the adhesive remover. I will be installing them as soon as they get here!