rafa27

I Desperate To Buy Andy's Kit, But I Do Not Know Any Shop Able To Install And Provide A Good Tune Around Philadelphia-pa.

XCELER8

Go to one of the best shops in the COUNTY hands down ECS is awesome. Here is driving directions. If I was closer I would have gone there.

1: Start out going EAST on S PENN SQ toward S BROAD ST/AVENUE OF THE ARTS/PA-611. <0.1 miles Map

2: Turn LEFT onto S JUNIPER ST. 0.1 miles Map

3: Turn LEFT onto JOHN F KENNEDY BLVD. <0.1 miles Map

4: Turn RIGHT onto N BROAD ST/PA-611. 0.2 miles Map

5: Merge onto VINE ST EXPY/I-676 E/US-30 E. 0.5 miles Map

6: Take the exit toward I-676 E/US-30 E/BEN FRANKLIN BR. 0.2 miles Map

7: Turn SLIGHT RIGHT onto N 6TH ST. <0.1 miles Map

8: Merge onto US-30 E via the ramp on the LEFT toward I-95 (Portions toll). 3.9 miles Map

9: Turn SLIGHT LEFT onto KAIGHN AVE/NJ-38 E. 5.4 miles Map

10: Merge onto NJ-73 S toward NEW JERSEY TURNPIKE/MARLTON/BERLIN. 1.4 miles Map

11: Merge onto NEW JERSEY TURNPIKE N toward NEW YORK (Portions toll). 26.4 miles Map

12: Merge onto I-195 E via EXIT 7A toward LAKEWOOD/SHORE POINTS. 11.1 miles Map

13: Merge onto CR-537 W/MONMOUTH RD via EXIT 16A toward SIX FLAGS/MT HOLLY. 3.2 miles Map

14: Turn RIGHT onto EMLEYS HILL RD. 0.3 miles Map

15: Stay STRAIGHT to go onto JONATHAN HOLMES RD. 0.8 miles Map

16: End at Cream Ridge, NJ 08514, US

Total Est. Time: 1 hour, 4 minutes Total Est. Distance: 54.43 miles

Jon

rafa27

Who they are ?

XCELER8

If you have to ask who ECS is you need to spend a lot more time reading the FI section here. East Coast Supercharging 609-752-0321 is one of the best companies that installs and tunes the C5. Chris and Doug are some of the nicest most intelligent people you will ever meet. They also have a lot of there own custom parts i.e. FMIC, brackets, etc. You would be a fool to go to anyone else if your that close.
Jon

0Jeff @ TPE

I would pay good money to have a shop like ECS within 100 miles of me.
There is ony a couple of places I would take my car to anywhere in the country. ECS is one of them. I actually considered have my car transported almost 2,000 miles to them.
Instead I decided to let this little backwoods mechanic build my motor instead. You probably dont know his name its a guy named Andy Green .
He has a little shop named A&......Something I dont remember..

Jerseyboy

East Coast Supercharging (ECS), no question about it. They are in Cream Ridge NJ, less then an hour from Philly. If you want a reliable and powerful ATI setup, they are the place to go. They have done alot of R&D on the ATI kit and come out with a near perfect setup. You couldn''t ask for a better place to install your blower on the east coast! Talk to them before you buy andy's kit though. They have one of thier own that works really well.

Jersey

NICK YOSKIN

hello there and welcome to the forum
i live in bucks county so i am around the corner from you. east coast supercharger is the place you need to go. very very easy to get to.

mdhmi

C5 blower shop selection is a no brainer if you're on the east coast.. ECS..

Mark

asmokegars

HI Nick - where in Bucks county? I am in Yardley. I have the Blue 382 stroker D-1sc getting the nitrous kit put on at ECS. I also have another project there you might have heard about. rafa27 - ECS no question. You will not be dissappointed.

Chris@East Coast Supercharging

Thanks for the props guys..

rafa27- feel free to give me a buzz anytime and I will go over some options with you or stop by at anytime.

1%r

Yup I with everyone.

These guys are da bomb

They do great work and stand behind everything they do. It's also a great place to stop by and have a burger

rafa27

Thanks body, i am in Hatboro. What kind of set up do you have ?

DOUG @ ECS

P1,D1,F1,F2.......pick your poison.

Geneus

Geez...poison? What kind of sales guy are you? "Pick your pleasure."

DOUG @ ECS

I'm a horrible sales guy, fortunatly I sell a product that sells itself.

asmokegars

And is addictive. I think you were right & Don was wrong. Don your right it is pleasure - Doug get Don ready for the next stage.

1%r

Ahhhh I already had a conversation with Don he's waiting for a ride when I'm fully tunned and I think we all know where he's going next!

Supercharger John

Just my .02 they're the BEST people you want to meet, and they will help you decide your best options based on your performance goals NOT your walet!

They've got the R&D down to a science and thier S/C kits are track proven!

Just give them a call and tell Chris or Doug that Supercharger John highly recommended them! Since your in the area I would suggest that you give them a call and check out thier operation!

They've got a great shop, and it will be worth the drive and peace of mind knowing you have real performance experts working on your ride.

They're the BEST!

Good luck with your next performance move.

Geneus

How did I miss this? Now that might be stretching it just a little bit.

1BAD-LS1

ECS stands for: EVERYDAY CORVETTES SEEM-SLOW!

That's what happens after you ride in an ECS blower car. And if you want to catch a ride in one soon, send me a PM, I am only 10 minutes from South Philadelphia, and will be happy to scare you to death, like Chris did to me...

All joking aside, great guys, and top notch work

See the sig for what the boys did to my car