sdnet

To those with the Maggie installed and a 3.4 pulley, what was your best 1/4th mile time?

itchynackers

I've been to byron once. Made 2 passes on a crowded 90 degree day. I suck at launching and managing wheel spin in 1st, 2nd, 3rd. Anyway, my second pass on Nitto NT-01's I got:

60'.....2.04
330'...5.507
1/8...8.15@96.84
1000'...10.363
1/4...12.19@124.06

I was getting pretty sideways in 2nd and almost aborted.

It was 2 hours between runs, so I left after that. With a good launch, I figure my optimal run would be no better than an 11.6.

I'm thinking about going with TT's. Very expensive though. Not that I'd be able to manage the power.

sdnet

Those are pretty impressive numbers for a run that wasn't perfect.

FunCool

With 3.4 pulley on stock zo6 I ran 11.4 @ 125mph with 1.85 short then I put 3.2 pulley and with the add rwtq it was easy to short 1.75 and ran 11.3 @ 126. Then next I put 2.8 pulley, cam and alky now I could not hook as well because of the rwtq best short was 1.89 with 11.3 @ 128mph. This was all done on nitto's 305's.