2004SpiralGrey

I was wondering if anyone had the tial BOV and if so how do you like it? I have the HKS SSQ BOV and I like it a lot but I heard some cars with the Tial and it sounds amazing.
Pics would be great.

lucky131969

I only thought the ricer guys installed the BOV's for the sound.......

2004SpiralGrey

I find it amusing it scar the little ricers that "Woosh" at me...lol

lucky131969

madmatt9471

I can't "WOOOOSH" very well unless I put it in neutral Darned A4 "WOOOSHING"

So my question is does anyone with an A4 have a Tial BOV or HKS SSQ?

Thanks,Matt

black98c5

NemesisC5

Whooosh....anybody????? I wanna hear too maybe Christmas Mod from Santa

clemsondave

You want a bypass valve for a supercharger. You can add a BOV inline if you really want the swoosh.

Steve'01

I had the Tial mounted right up top of the radiator, it worked well but made too much "WHOOOSH for my taste. I ended up mounting a Vortech Mondo down low in the drivers side front fender. I have Andy's kit with a T trim. You may like the extra sound for awhile but it may get old for you as well.

24hr Z06

I installed a BOV on my old car, an Audi TT, and I remember going WOT while approaching a bus stop and then having to lift because the light turn red.. some poor old lady nearly jumped after she heard the "whooosh", to make matters worse, I was under a bridge.. no one ever expected the noises that came from that car..

tlaselva

Reminds me the summer that I had a turbo Golf try to intimidate me with his BOV one evening at a light.
I cerimoniously drowned him out the only way a catless 447ci motor with aftermarket mufflers at 4000rpm can.
I think he realized he 'wrote a check his car couldn't cash' b/c he didn't try to run me at the green. But I had my right foot ready in case he was dumber than he looked.

NemesisC5

Funny Good Post Tony

VetteFish

my tial goes in on monday and i can't wait!

Anybody have any clips???

GKE

What BOV comes with the A&A kit?

FactoryRaceCar

Mine came with Vortech Race BOV.

0Brian@FI Performance

I think I have tested every single BOV out there and can supply you guys with whatever type of sound you are looking for. The TIAL's and HKS SSQV's are very nice sounding valve sub 14 psi, more boost yields a higher pitch.

I will be back in the office tuesday and have plenty in stock of all kinds...

clemsondave

Are all of ya'll really running just a BOV on a blower setup? I was always told bypass valve for a blower and BOV for turbo.

0Brian@FI Performance

It all depends on how your setup works... A typical BPV setup is used where the air has already been metered so it goes back into the system like in most Audi/VW/Porsche applications. A BPV is also a bit more stealth keeping everything inside. a BOV can be used in any setup where the air is metered right before the TB like in most of our setups etc...

DON'T LET THE BOSCH BPV FOOL YOU INTO THINKING IT IS THE ONLY OPTION IN THAT TYPE OF SETUP(BPV). The Hyperboost Stealth valve is a great upgrade for the APS systems etc...If you search under my profile in the archives I have a ton of good info to read.

A pic of the Hyperboost Valve



Brian

vetterlatethannever

chris308

what spring are you all using with the Tial?