******Halltech's New Carbon Fiber Ram Air Tunnel Port*******
10-25-2008, 06:49 PM
#1
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
******Halltech's New Carbon Fiber Ram Air Tunnel Port*******
Halltech and Motorsport Composites have teamed up to bring you the finest hand laid carbon fiber Ram Air Tunnel Port for your FI cooling needs.
The high pressure zone on the C5 is the license plate area and we take full advantage of the massive amount of cooler air available to cool your intercooler or oil cooler.
This is an all new mold made by the folks that fabricate all the Pratt and Miller carbon fiber parts for the C6.R and C6.RS.
Order
The cost of these to Halltech allows us only 20% markup at our sales price, but the quality is even better than the picture shown. Our new mold makes the finish ZR1 quality or better. We'll have new pictures Monday.
The high pressure zone on the C5 is the license plate area and we take full advantage of the massive amount of cooler air available to cool your intercooler or oil cooler.
This is an all new mold made by the folks that fabricate all the Pratt and Miller carbon fiber parts for the C6.R and C6.RS.
Order
The cost of these to Halltech allows us only 20% markup at our sales price, but the quality is even better than the picture shown. Our new mold makes the finish ZR1 quality or better. We'll have new pictures Monday.
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
Last edited by Halltech; 10-28-2008 at 12:48 PM.
10-25-2008, 06:54 PM
#2
Le Mans Master
Member Since: Sep 2000
Location: Clouds Over California
Posts: 6,857
Received 439 Likes
on
236 Posts
Halltech and Motorsport Composites have teamed up to bring you the finest hand laid carbon fiber Ram Air Tunnel Port for your FI cooling needs.
Halltech's Twin Turbo with the RATP:
The high pressure zone on the C5 is the license plate area and we take full advantage of the massive amount of cooler air available to cool your intercooler or oil cooler.
This is an all new mold made by the folks that fabricate all the Pratt and Miller carbon fiber parts for the C6.R and C6.RS.
Order
The cost of these to Halltech allows us only 20% markup at our sales price, but the quality is even better than the picture shown. Our new mold makes the finish ZR1 quality or better. We'll have new pictures Monday.
Halltech's Twin Turbo with the RATP:
The high pressure zone on the C5 is the license plate area and we take full advantage of the massive amount of cooler air available to cool your intercooler or oil cooler.
This is an all new mold made by the folks that fabricate all the Pratt and Miller carbon fiber parts for the C6.R and C6.RS.
Order
The cost of these to Halltech allows us only 20% markup at our sales price, but the quality is even better than the picture shown. Our new mold makes the finish ZR1 quality or better. We'll have new pictures Monday.
Hey Jim...good to see you still around. How is this different then the one on my car that I have had for 4 years? The one I have has lasted very well and looks very cool IMHO.
10-25-2008, 07:04 PM
#3
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,988
Received 583 Likes
on
313 Posts
St. Jude Donor '09
The goal is to continue to provide the best parts we can for the Corvette community.
How's Andy doing? Haven't heard from him in about 5 years. I'm still alive for now.
I get inquiries once in a while about the Stinger Hood. Are you and Kerry still making them?
Jimbo
Last edited by Halltech; 10-25-2008 at 07:08 PM.
10-25-2008, 09:59 PM
#7
Le Mans Master
Member Since: Sep 2000
Location: Clouds Over California
Posts: 6,857
Received 439 Likes
on
236 Posts
Motorsport Composites is simply the best in terms of quality. They took our mold and did a new mold with finish perfection as their goal. I thought the other mold looked fine, but they did not. These puppies cost us over $265.80 each just to make with shipping (double what we used to pay for them), plus the initial mold cost, so we are not selling these to get rich.
The goal is to continue to provide the best parts we can for the Corvette community.
How's Andy doing? Haven't heard from him in about 5 years. I'm still alive for now.
I get inquiries once in a while about the Stinger Hood. Are you and Kerry still making them?
Jimbo
The goal is to continue to provide the best parts we can for the Corvette community.
How's Andy doing? Haven't heard from him in about 5 years. I'm still alive for now.
I get inquiries once in a while about the Stinger Hood. Are you and Kerry still making them?
Jimbo
Kerry is still making the C5 hood, he still has the photoshop version of a C6 hood I got to call him and check on it....he is very busy.
I am glad you are doing well. Keep up the good work...your designs have faired well in the community.
If I don't go with the TS front, this will definitely be on the car this winter.
