typeav

Didn't see heads and cam in your signature and this is another 100 rwhp, if a C5 make around 300 rwhp in the dyno and you making 500 rwhp with the procharger .......... I know this is a 7 years old thread but my question is.

I'm planning to get the Stage II intercoolers and pipes without the craddle, can I use the current GM craddle with this setup ? Does the pipes from the intercooler fit properly and all around the GM craddle ?

clif

I had a stock engine and heads. 500 RWHP felt great! I had the Brembo brakes that helped stopped the car.

typeav

Clif, I followed you all the steps on your stage II installation when you did it, do you think the GM cradle work with the pipes and intercooler ?

corvet786c

I am still on the stage 1 making over 550 rwhp on a 6 Rib 4.38 Pulley. I still have the 3.5 intercoolers and y inlet. I am still using Patriot performance stage III heads, with Brian Tooley springs.

I do have the upgraded bracket and a Fast 102 on an A4, with 3.42 gears.

typeav

Looking at your profile picture, did you use the procharger craddle or the GM craddle ?

corvet786c

Still stock GM.