Dallas Performance F2 ProCharger Bracket and 50mm COG Drive System - Who wants one?
#1
Former Vendor
Thread Starter
Dallas Performance F2 ProCharger Bracket and 50mm COG Drive System - Who wants one?
Well after hundreds of hours of design and development we are ready to release some teaser pics of the Dallas Performance F2 Bracket and Dedicated Cog Drive System.
Some important details about our F2 bracket and drive system:
* Blower maintains DP Big Mouth Air Filter and 4.5" inlet ducting
* Works with modified factory water pump or Meziere electric WP
* Full 50mm wide COG Drive System
* Allows for mounting of F2 ProCharger with STOCK C6 hood
(Stock C5 should clear as well but is untested at this time)
* Brute overkill in bracket rigidity to minimize harmonics
* Easy access to tensioner for adjustments
This system will work with D1/F1A/F1C/F1R/F2 ProCharger Headunits on your LS1/LS2/LS3/LS7 based engine.
Currently taking pre-orders with iIntro pricing set at $3999 for first 10 systems.
DP/F2 System includes:
* 50mm Cog Blower Belt
* 50mm Cog Billet SFI Balancer
* 50mm Cog Blower Pulley (sprag option +$400)
* 50mm Hard Anodized Idler Pulley
* Billet Supercharger Main and Sub Brackets, Anti Flex Beams
* Billet Bracket Spacers, Tensioner Assembly, All Hardware
* DP Direct Drive System
* Stainless Steel Power Steering Hose
* 4 and 6 rib Belts
* Black or Clear Annodized Finish
Some important details about our F2 bracket and drive system:
* Blower maintains DP Big Mouth Air Filter and 4.5" inlet ducting
* Works with modified factory water pump or Meziere electric WP
* Full 50mm wide COG Drive System
* Allows for mounting of F2 ProCharger with STOCK C6 hood
(Stock C5 should clear as well but is untested at this time)
* Brute overkill in bracket rigidity to minimize harmonics
* Easy access to tensioner for adjustments
This system will work with D1/F1A/F1C/F1R/F2 ProCharger Headunits on your LS1/LS2/LS3/LS7 based engine.
Currently taking pre-orders with iIntro pricing set at $3999 for first 10 systems.
DP/F2 System includes:
* 50mm Cog Blower Belt
* 50mm Cog Billet SFI Balancer
* 50mm Cog Blower Pulley (sprag option +$400)
* 50mm Hard Anodized Idler Pulley
* Billet Supercharger Main and Sub Brackets, Anti Flex Beams
* Billet Bracket Spacers, Tensioner Assembly, All Hardware
* DP Direct Drive System
* Stainless Steel Power Steering Hose
* 4 and 6 rib Belts
* Black or Clear Annodized Finish
#5
Former Vendor
Thread Starter
#6
Melting Slicks
As usual, nice work Taylor
#8
Melting Slicks
#10
Former Vendor
#15
Burning Brakes
Member Since: Apr 2003
Location: Terre Haute Indiana
Posts: 785
Received 0 Likes
on
0 Posts
I love the looks of this kit. Is it based along the concept of the flip drive system? Also, I have heard people say not to use a cog system with a manual. Is that true? Is this something you could use on a "driver" vehicle and not just a purely drag strip car? Thanks!
#16
Race Director
#17
Tech Contributor
I love the looks of this kit. Is it based along the concept of the flip drive system? Also, I have heard people say not to use a cog system with a manual. Is that true? Is this something you could use on a "driver" vehicle and not just a purely drag strip car? Thanks!
#19
Le Mans Master
#20
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts