((JULY 2012 RESULTS)) Z06, stock bottom/heads, A&A Vortech/230's cam, 630whp.........
07-26-2012, 01:42 PM
#1
Le Mans Master
Thread Starter
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,125
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
((JULY 2012 RESULTS)) Z06, stock bottom/heads, A&A Vortech/230's cam, 630whp.........
Owner: Chris, Springfield MASS area
car: 2001 Z06
motor: 2001 LS6, stock bottom, heads never off
supercharger: www.aacorvette.com Vortech Strim, 3.4 pulley
boost recorded(dyno): 10.9psi
(JULY 2012 install)cam: 230's durations, lift in the .610's, 113 LSA (Don Kinder spec'd)
previous cam: 220/228 .581/.588.......Chris wanted a snotty idle and some more power
headers:Kooks 1 3/4 with cats
methanol:Julio's www.alkycontrol.com kit
Changes from previous dyno results/tuning: Powerbond crank pulley(stock size), BAP, dual valvesprings
DYNO used: www.slowhawkperformance.com (Don Kinder) Mustang dyno
DYNO date: July 20, 2012
RESULTS: 630whp(Chris can post up the graph soon)
Previous results were 590whp in May2011 at Don's dyno with the 220/228 cam and 3.6 pulley
Thanks to those involved: Don Kinder(tuning/dyno/cam selection/pulley/dealing with Chris
), Bret Bradbury, Andy at A&A Corvettes
Here's Chris doing work on the Z
car: 2001 Z06
motor: 2001 LS6, stock bottom, heads never off
supercharger: www.aacorvette.com Vortech Strim, 3.4 pulley
boost recorded(dyno): 10.9psi
(JULY 2012 install)cam: 230's durations, lift in the .610's, 113 LSA (Don Kinder spec'd)
previous cam: 220/228 .581/.588.......Chris wanted a snotty idle and some more power
headers:Kooks 1 3/4 with cats
methanol:Julio's www.alkycontrol.com kit
Changes from previous dyno results/tuning: Powerbond crank pulley(stock size), BAP, dual valvesprings
DYNO used: www.slowhawkperformance.com (Don Kinder) Mustang dyno
DYNO date: July 20, 2012
RESULTS: 630whp(Chris can post up the graph soon)
Previous results were 590whp in May2011 at Don's dyno with the 220/228 cam and 3.6 pulley
Thanks to those involved: Don Kinder(tuning/dyno/cam selection/pulley/dealing with Chris
), Bret Bradbury, Andy at A&A CorvettesHere's Chris doing work on the Z
07-27-2012, 10:06 PM
#9
Team Owner
Right on really nice results! 
Like to see the graph too!
Thanks,Matt
Like to see the graph too!
Thanks,Matt
