V3SI install after rad or before rad
#1
Burning Brakes
Thread Starter
V3SI install after rad or before rad
So im changing my rad to a Dewitts cut down with the upgraded fan setup.I ve never installed a blower so please bare with me.
Do i install the blower first (without the ic an piping obvisously ) before the rad ???
or
I do the rad install then the blower install ???
Thanks
Eric
Do i install the blower first (without the ic an piping obvisously ) before the rad ???
or
I do the rad install then the blower install ???
Thanks
Eric
#3
Burning Brakes
Thread Starter
#4
Drifting
#7
Team Owner
#8
Instructor
Member Since: Dec 2013
Location: Jonesboro Georgia
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to put the blower in first after my cam swap .. hopefully its a ton easier than with the radiator in
pulled the blower to change the power steering pulley a month or so ago .. no fun at all trying to get it back in and hook up the piping on the bottom
pulled the blower to change the power steering pulley a month or so ago .. no fun at all trying to get it back in and hook up the piping on the bottom
#9
Burning Brakes
Thread Starter