JoeyG

Looking goid. Keep up the progress

mcshocks

Underhood wiring is all done with a Mighty Mouse catch can in the mix now

mcshocks

One more

mcshocks

Tied in all my grounding under the passenger dash/footwell area

mcshocks

All done, need to do a bunch of programming on the controller then fill a bottle

mcshocks

Getting close

mcshocks

All tuned on motor, finally got the NCC software going & time to spray soon

Leukic

What wheel combination is that

mcshocks

Dark stars 17x4.5" out front & 15x10" out back with LG drag spindles

0NitrousOutlet

Wow! That's a really clean install! Let us know if you need anything, and we'll be more than happy to help you out!

mcshocks

Thanks, love your guys products, just did a hard line plate kit on a 99 SS and loved the kit. Getting pretty antsy to spray, finished up my initial start up tune on the NCC now and hoping to spray maybe this weekend for a couple test hits on a 100 pill & keep moving forward.

0NitrousOutlet

If you can get me some really good pictures and videos, I will send it over to my marketing guys and have them post it up on our Facebook page.

mcshocks

Thanks, absolutely will do, working out of town but I'll borrow the wife's DSLR once I get back in town.

mcshocks

Finally ran it on a 100 shot, picked up 10mph in the 1/8th but my PTC convertor is just too tight, thing goes out 20 ft then the nitrous kicks in, even tried activating at 2800rpm to wake up the TC but it just doesn't flash high enough.

mcshocks

Talked to Justin over at FTI yesterday & ordered up a custom billet triple disc that should flash 3600-3800 on motor & couple good up top for a big shot of spray, hopefully this rectifies my horrible 60's

mcshocks

Presents showed up today

mcshocks

One more pic

mcshocks

New TC & trans cooler is in

mcshocks

Trans cooler

mcshocks

2 step button in now too, works off the foot brake & I put in a secondary button in that I'll let go of in my run so I don't have backfires on decel