A&A upgrade completed and now I have RESULTS!!
#1
Melting Slicks
Thread Starter
A&A upgrade completed and now I have RESULTS!!
Wow! what an upgrade. First off I want to thank my Friend Ty at Custom Horsepower who got me the kit. The install of the new parts went pretty good. It was the un installation of the old Vortech kit that was a MAJOR pain in the butt. I had to completely removed the EBCM, Power steering reservoir, Power steering pump pulley and a whole bunch of water lines that went all over the engine bay and down behind the driver front inner fender for the Air/Water intercooler. Im real happy with the numbers. Here are the details of the setup that I know about. Mallett won't give me any info in the car (long story)
Video of a pull
Bottom End : Unknown, assuming stock
Heads: Trick Flow 225cnc heads
Cam: 580 232/235 115*
Kooks 1 7/8 headers and full 3" exhaust
Car made 612whp/512wtq on 8.2lbs of boost and 15* of timing.
Im real happy with the results. Here are some pics of the old setup, Removal pics, new setup Pics, and the dyno chart. On the chart the Red lines are the old setup and the blue is the new setup
Getting the new stuff on!!
Video of a pull
Bottom End : Unknown, assuming stock
Heads: Trick Flow 225cnc heads
Cam: 580 232/235 115*
Kooks 1 7/8 headers and full 3" exhaust
Car made 612whp/512wtq on 8.2lbs of boost and 15* of timing.
Im real happy with the results. Here are some pics of the old setup, Removal pics, new setup Pics, and the dyno chart. On the chart the Red lines are the old setup and the blue is the new setup
Getting the new stuff on!!
#5
Melting Slicks
Thread Starter
Yes, 3.8 pulley. i was thinking of going with the 3.6 but im glad I didn't. I dont want to push the bottom end that far, assuming its stock. It is for sure worth the work! I spend a week working on it for about 4 hours a day on it. I had a lot or road blocks either from the junk Vortech kit or from extra coolers and other stuff that was added on by Mallett. I still dont have a place to mount the shock canisters. They were on the radiator cover but that is gone now.
#7
Melting Slicks
Thread Starter
#11
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,707
Received 19,233 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Great numbers from the car. Congrats.
#12
Melting Slicks
Thread Starter
#14
Melting Slicks
Thread Starter