Need a 3.6/3.7 6 rib procharger pulley
#1
Race Director
Thread Starter
Need a 3.6/3.7 6 rib procharger pulley
I hate to ask but I seen to get more responses in the FI section when I need parts. I wish we had our own f/i FS section.
3.6/3.7" 6 rib for procharger...So anyone have one? Seems like these are impossible to find and I have tried on multiple sites and even the c4-c7 fs section. I know I could buy new but figured I would keep trying. I'm sure I will grenade my motor but should be fun until then. Thanks
3.6/3.7" 6 rib for procharger...So anyone have one? Seems like these are impossible to find and I have tried on multiple sites and even the c4-c7 fs section. I know I could buy new but figured I would keep trying. I'm sure I will grenade my motor but should be fun until then. Thanks
#3
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,261 Likes
on
1,056 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
I have a 3.8 but I believe it was made for a mustang, the hub is offset and only has one shoulder... if you want to try that out and see if you can make it work let me know
#4
Race Director
Thread Starter
Yeah then they tax on 15+ for shipping but may have to go that route..I have it posted on mustang forums and still nada. lots of 4.0+
I just came from a 3.85 and at 11psi(668rwhp) I wanted to go 3.6 and let it eat..but thanks though..
I just came from a 3.85 and at 11psi(668rwhp) I wanted to go 3.6 and let it eat..but thanks though..
#5
Melting Slicks
Stock Balancer? I'll have a 3.4 for sale soon. Let her really eat.
#14
#16
Melting Slicks
I should buy this for future power but i don't have the fuel system for it currently with my OD balancer etc. It would just about max out the impeller speed on my combo. The car makes 15 psi on the 4.25 pulley/8.10 OD balancer. This would be what 20 psi?
Matt lets see if anyone needs it more than me. I may pick it up in a bit if no interest.
Thanks guys!
Matt lets see if anyone needs it more than me. I may pick it up in a bit if no interest.
Thanks guys!
#17
Team Owner
I should buy this for future power but i don't have the fuel system for it currently with my OD balancer etc. It would just about max out the impeller speed on my combo. The car makes 15 psi on the 4.25 pulley/8.10 OD balancer. This would be what 20 psi?
Matt lets see if anyone needs it more than me. I may pick it up in a bit if no interest.
Thanks guys!
Matt lets see if anyone needs it more than me. I may pick it up in a bit if no interest.
Thanks guys!
Thanks, Matt