wildthingwood1994

Where can I find a pdf or such form of the kb supercharger kit install manual? I have the paper one but would like another in a better format, thanks.

Z06PSI

I have it in two .pdf's. PM me your email.

NITRO UK

Great work ZO6 psi , kenne bell stuff is rare to find .

wildthingwood1994

Thank you so much, even KB themselves don't have it anymore.

Z06PSI

I just bought a new Mustang and I refuse to deal with KB for anything. The way they treated the Corvette market was s$#^ and especially the people who bought the system. Worst support ever.

Your manuals will go out tonight.

wildthingwood1994

Hope this kit goes on with no hiccups then...

Z06PSI

Well between myself and Nitro we can help with almost anything. Most other KB adopters either are not here or won't admit they had a kit at one time.

wildthingwood1994

Appreciate it, I'm not shooting for the stars on HP so.

Z06PSI

Yeah don't do that. The unicorn conversation will start. I got to 625rwhp with some substantial effort. The kit just wasn't as advertised.

wildthingwood1994

I want 500 safely with meth and no more than 10#s.

Z06PSI

Easily done. I did 550 on a stock motor with no issues.

wildthingwood1994

Awesome. Did you send that PDF?

Z06PSI

Dude I live in Hawaii..calm down. Lol

wildthingwood1994

Just making sure it didn't go to spam or anything, I'm east coast so quite the difference.

NITRO UK

, he's cool , I like enthusiasm .

Yeah keep it simple I got 533rwhp stock pulley 90mm ls2 t/body NO meth and never had any problems at all.

Was a sweet car for what I wanted and should of kept it

wildthingwood1994

Couple questions, was that an ls6 and how much boost is stock pulley? The set up currently has an 8 rib on it and idk which pulley it is.

Z06PSI

2.6 or 2.8? Throttlebody?

4.00 or 4.25 I think was stock which was 8 pounds. I ended up with a 2.75 and 260 degree IATs.

NITRO UK

Hi. Yeah 2001 ZO6

I think the stock pulley was 6psi 6rib not sure what size .

They did send me an 8psi pulley which I never used , I just measured it and it's bang on 3 1/2" so maybe the stock one was around 3 3/4" .

If your pulley is 3" or 3 1/4" might be around 9-10 psi , not sure though.
Not sure if kb did an 8rib option but yours has been tinkered with .

Might be worth checking the crank damper pulley just to verify it is stock size , diameter not rib .

Z06PSI

I think on the 2.75 with IW 8" crank pulley I hit 20psi.

NITRO UK

Looks like you played way more than me lol , been a while , what was the psi with 2.75 .

All I have left is that 3.5 6 rib pulley which I was told would be around 8 psi , interested what the op has .