3.125 pully on vortech
07-22-2015, 07:08 PM
#1
3.125 pully on vortech
What kind of boost should I be making? I have a elect gauge and I just tapped a machanical gauge in both read different. Elec. reads 8-10psi. Mec. Reads 3-4psi
07-28-2015, 01:05 AM
#4
ISIS SUCKS FAT CHOAD
I'd imagine it's supposed to be more than 3-4 psi. Your mechanical gauge is probably correct. Could verify it by installing another gauge if you like.
07-28-2015, 06:44 AM
#5
Le Mans Master
Member Since: Feb 2007
Location: Oviedo Florida
Posts: 8,816
Received 1,254 Likes
on
817 Posts
2023 C2 of the Year Finalist - Modified
2021 C2 of the Year Finalist - Modified
2016 C5 of Year Finalist
I would guess that a pulley with 3.1 would be too much boost
for your set up. My A&A kit had a 3.6 pulley new. I had 7 lb boost,I went to a 3.48 pulley and went to 12 lb boost, with meth. I would
guess you will have more boost.
for your set up. My A&A kit had a 3.6 pulley new. I had 7 lb boost,I went to a 3.48 pulley and went to 12 lb boost, with meth. I would
guess you will have more boost.